CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Help me please

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 22, 2009, 08:26
Question Help me please
  #1
New Member
 
Hassan
Join Date: Oct 2009
Posts: 3
Rep Power: 7
Takeoff is on a distinguished road
Hello everyone ,I'm new here.

I want to design intake manifold 1 inlet and 4 outlets 3D transient model
I've some problems following :

1.I want to set boundary @ outlet by pressure profile like this

Crank angle / Pressure
x1 / y1
x2 / y2
. .
. .

How can I set these data each outlet


***Opening and closing valve @ 600 rpm, 2000 rpm and 3600 rpm

2.Need I do intake valve (Moving mesh ??)
If yes ,How?

3.Has anybody validation case about intake manifold?

Thanks , Hassan
Takeoff is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 10:08.