CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   How to plot Iso-surface in Fluent? (http://www.cfd-online.com/Forums/fluent/69736-how-plot-iso-surface-fluent.html)

ivanbuz November 2, 2009 19:48

How to plot Iso-surface in Fluent?
 
I want to plot Iso-surface of Q-criterion from LES simulation like those in the picture.

Can anyone give me a hint about how to do it in Fluent? Thanks alot!

http://www.cfd-online.com/Forums/mem...-criterion.jpg

herntan November 3, 2009 05:51

U need have the simulation run with result first.
Then create at Surface > ISO-surface.
u will need to specify what properties u want to use for this surface.
Basically , ISO surface is just link up all the point with same value.
For example, u want see all place with velocity = 10m/s, then u specify this value in ISO surface. fluent will link up all place with velocity =10m/s and make it a surface.

Then u have to open up the light at view to get the 3D render view.
after that u just view>grid of the ISO-surface u created.

I only done this once for fun. This is just some pieces in my memory.
Hope it helps.

Philipov November 3, 2009 06:48

Try using Tecplot for example.... you can do a lot...

ivanbuz November 3, 2009 16:13

Quote:

Originally Posted by herntan (Post 234940)
U need have the simulation run with result first.
Then create at Surface > ISO-surface.
u will need to specify what properties u want to use for this surface.
Basically , ISO surface is just link up all the point with same value.
For example, u want see all place with velocity = 10m/s, then u specify this value in ISO surface. fluent will link up all place with velocity =10m/s and make it a surface.

Then u have to open up the light at view to get the 3D render view.
after that u just view>grid of the ISO-surface u created.

I only done this once for fun. This is just some pieces in my memory.
Hope it helps.


Thanks a lot! I try and it works. There is one more question (I know you have only memory pieces. It is understandable if you don't remember it.) say I want to display several iso-surfaces with different values, how can I make them have different colors?

ivanbuz November 3, 2009 16:26

Quote:

Originally Posted by Philipov (Post 234950)
Try using Tecplot for example.... you can do a lot...

Thanks! Can I have some more details about how to do it in Tecplot?

herntan November 3, 2009 23:09

I just know u can create more then one ISO surface.
Maybe u can create with different value of surface and paint it with different color.
U should be able to show more then one surface when u show grid.

But i not sure how to paint surface with different color. Maybe u can tell me when u did it.

Philipov November 4, 2009 06:10

It can not be explained in 2 words.... open help files they are useful...

ivanbuz November 4, 2009 13:59

YH,

yes, I can create iso-surfaces with different values and display them in one picture, but just can not use different colors for them. I will post here when I know the answer. Thanks!

ivanbuz November 4, 2009 14:00

Svetlin,

I did read the manual, but can not find the answer yet

katarin April 8, 2013 07:11

Quote:

Originally Posted by Philipov (Post 234950)
Try using Tecplot for example.... you can do a lot...

Hello there.
I have exactly the same problem.
I want to import an iso-surface I have created in Tecplot, but I dont understand the format of the data file I have exported from CFD-Post.
I can see it gives me the x-y-z coordinates, later t gives me the faces and then it gives me numbers I dont know what they refer to.
Would u have an answer on that?
Please help.
Thank you in advance

oj.bulmer April 8, 2013 11:55

You mean, you want to see FLUENT results in Tecplot? You can't export it from CFD Post.
You will need to export your solution as CGNS file through FLUENT itself. Somewhere in Files >> Export >> Solution etc. Here you can select the variables you want to export, and save the cgns file. This can be opened in any visualization software.

But with Tecplot, you don't even have to do that. You can directly read the FLUENT solution files into it.

OJ

katarin April 9, 2013 08:05

Quote:

Originally Posted by oj.bulmer (Post 419147)
You mean, you want to see FLUENT results in Tecplot? You can't export it from CFD Post.
You will need to export your solution as CGNS file through FLUENT itself. Somewhere in Files >> Export >> Solution etc. Here you can select the variables you want to export, and save the cgns file. This can be opened in any visualization software.

But with Tecplot, you don't even have to do that. You can directly read the FLUENT solution files into it.

OJ

Hello,
Thank you so much for your answer.
I have already exported the solution file that I need.
It gives me X-Y-Z coordinates with the corresponding nodes.
I also need the connectivities, which I choose, but it gives me a connectivity number (one number), whichI dont Know what this number refer to.
Later in the txt file I get, it gives me the faces.
At some point, it gives 5 nodes for each face, and I dont know how to change it, to put it in tecplot, and in which catecory it belongs.
I can see what you say in CFD-Post environment, but when I scale it in the Z axis, my design gets ruined.
I also need some other results, and need to put it in tecplot.

Is there a way to solve my problem?
Thank you in advance

innocentemy May 20, 2015 03:36

ANSYS FLUENT ISO-Surface animation request
 
Hi. Could you please help me? I want to get a 3D iso-surface similar to these movies that I got it from the Internet using FLUENT? https://www.youtube.com/watch?v=DLM9dF-m4zs https://www.youtube.com/watch?v=MCW9ce-qm6E

Thank you in advance..


All times are GMT -4. The time now is 20:52.