CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Meshing and convegence the tangenbtial Cyclone

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 10, 2009, 17:14
Default Meshing and convegence the tangenbtial Cyclone
  #1
New Member
 
Esmail
Join Date: May 2009
Posts: 11
Rep Power: 8
esicia is on a distinguished road
Hi all. I have two basic questions about the cyclones

1. one recommends the aspect ratio of 5-10 for cyclones. what mean the aspect ratio? is that the growth factor in boundary layer meshing? what happened if i don't consider any boundary layer for faces? I have some problem in internal integrity of boundary meshes in volume.

2. I get convegence with k-epsilon and RSM (first order) without injecting the particles (solid), but when turn on the DPM, the residual diverged, especially, when I increase the number of iteration in tracking parameters in DPM window. how can I be sure that the number of iteration in tracking pararmeter is enough?

Thanks dor your recommendation
esicia is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 11:33.