CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

controling loops on cells

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 22, 2009, 11:40
Default controling loops on cells
  #1
Member
 
MOHSEN Zendehbad
Join Date: Aug 2009
Posts: 35
Rep Power: 8
mohsen zendehbad is on a distinguished road
we can loop on all the cells of a thread by writing the following lines, but is there any way to control this loop, i mean can we make it start from a specific coordinate or specific cell or it should always start from a specific cell?


begin_c_loop(c0,t0)
{}
end_c_loop(c0,t0)
mohsen zendehbad is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Import netgen mesh to OpenFOAM hsieh Open Source Meshers: Gmsh, Netgen, CGNS, ... 32 September 13, 2011 05:50
physical boundary error!! kris CD-adapco 2 August 3, 2005 00:32
Ignore cells on partition boundary Karl FLUENT 7 May 11, 2002 22:12
Looping over cells Karl FLUENT 4 March 26, 2002 22:18
UDF: neighbour cells, upwind cells Dmitriy Makarov FLUENT 0 February 18, 2001 14:53


All times are GMT -4. The time now is 01:08.