|November 26, 2009, 07:42||
seeking for help about a room with negative pressure
Join Date: Sep 2009
Posts: 17Rep Power: 8
i am trying a room with negative pressure. the details are: the pressure of this room is -620Pa, there exists a hole in some wall, and the pressure outside is 0, so the air flows into the room. to maintain the negative pressure, there exists an exhaust fan. so, how can i simulate this problem to get the air field?
i set the hole as pressure inlet and the value is 0, right? the depth of the wall is 0.6m, and i also set an exhaust fan and the gauge value is -620Pa and this fan can increase the pressure of the exhuasted air by 620Pa, right?
but i am depressed by this simulation. the massflow rate is too big for my question and the pressure of the room is not always -620Pa. i am puzzled now.
so, have you some good suggestions for my question?
Ps: the hole in the wall is very very small. in fact, the question i am stuyding is the leakage of the concrete wall, so i set a hole in the wall.
thanks for your help!
|Thread||Thread Starter||Forum||Replies||Last Post|
|Pressure BC for combustion chamber||Giuki||FLUENT||1||July 19, 2011 11:35|
|High pressure in rhopSonicFoam results in negative pressure||shangzung||OpenFOAM||0||November 5, 2009 04:24|
|negative pressure||mAx||FLUENT||0||January 25, 2006 15:31|
|what the result is negatif pressure at inlet||chong chee nan||FLUENT||0||December 29, 2001 06:13|
|Hydrostatic pressure in 2-phase flow modeling (long)||DS & HB||Main CFD Forum||0||January 8, 2000 16:00|