CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

seeking for help about a room with negative pressure

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 26, 2009, 07:42
Question seeking for help about a room with negative pressure
  #1
New Member
 
mengyue
Join Date: Sep 2009
Posts: 17
Rep Power: 16
mengyue1 is on a distinguished road
hi guys,
i am trying a room with negative pressure. the details are: the pressure of this room is -620Pa, there exists a hole in some wall, and the pressure outside is 0, so the air flows into the room. to maintain the negative pressure, there exists an exhaust fan. so, how can i simulate this problem to get the air field?
i set the hole as pressure inlet and the value is 0, right? the depth of the wall is 0.6m, and i also set an exhaust fan and the gauge value is -620Pa and this fan can increase the pressure of the exhuasted air by 620Pa, right?
but i am depressed by this simulation. the massflow rate is too big for my question and the pressure of the room is not always -620Pa. i am puzzled now.
so, have you some good suggestions for my question?
Ps: the hole in the wall is very very small. in fact, the question i am stuyding is the leakage of the concrete wall, so i set a hole in the wall.
thanks for your help!
mengyue1 is offline   Reply With Quote

Reply

Tags
negative pressure

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure BC for combustion chamber Giuki FLUENT 1 July 19, 2011 12:35
High pressure in rhopSonicFoam results in negative pressure shangzung OpenFOAM 0 November 5, 2009 04:24
negative pressure mAx FLUENT 0 January 25, 2006 15:31
what the result is negatif pressure at inlet chong chee nan FLUENT 0 December 29, 2001 06:13
Hydrostatic pressure in 2-phase flow modeling (long) DS & HB Main CFD Forum 0 January 8, 2000 16:00


All times are GMT -4. The time now is 08:06.