CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   convert to real in gambit (http://www.cfd-online.com/Forums/fluent/71423-convert-real-gambit.html)

mutena24 January 1, 2010 21:20

convert to real in gambit
 
Hi all,
i am using gambit 2.2.30. i working on a project. i have drawn pipe in Cativa V19. i am importing gambit but could not convert to real.
could anyone give me information how to convert to real?
sincerely yours

teguhtf January 1, 2010 22:53

Hello,
To convert it i think you can choose option below Boolean logic. there is button to convert virtual to real.
Hope it helps!!
teguhtf

mutena24 January 2, 2010 09:59

Quote:

Originally Posted by teguhtf (Post 241259)
Hello,
To convert it i think you can choose option below Boolean logic. there is button to convert virtual to real.
Hope it helps!!
teguhtf

thanks your advise but still i couldn't do it. please more information to explain that. :(

teguhtf January 2, 2010 11:06

In some case you can convert it at once if there is simple geometry (some faces). but if there is complex geometry, convention doesnt work. Sometime i cut in pieces to repair virtual things. Anyway, there is no differences between real and virtual on your final mesh. but Boolean logic work in real things only.
hope it helps
teguhtf:)

mutena24 January 3, 2010 10:33

Quote:

Originally Posted by teguhtf (Post 241300)
In some case you can convert it at once if there is simple geometry (some faces). but if there is complex geometry, convention doesnt work. Sometime i cut in pieces to repair virtual things. Anyway, there is no differences between real and virtual on your final mesh. but Boolean logic work in real things only.
hope it helps
teguhtf:)

thank you again for your advises :) my exam will start at university next week so i should work very hard for now:( then i can look after gambit. however you can share resourse etc pdf if you have. if you share, i will be glad :):)

teguhtf January 3, 2010 17:35

You're welcome. For further information about gambit tips & trick in http://www.anova.com.tr/dosyalar/destek/gambittips.pdf
or you can read gambit manuals (there are much site upload it on the net)
there are much information about gambit usage!!!
Hope it helps:D
teguhtf

-mAx- January 5, 2010 02:29

if your import gives you an virtual volume, you won't be able to convert it into real.
Try to import it as STEP file, the result should be a real volume.
Handling with real volumes, is just a MUST if you need to work with boolean operation. (extracting fluid volume form solid is the only operation which needs boolean operation (from my side). All the others can be handled with virtual tools)
But working with real volumes is much easier than working with virtual ones (but not impossible)

herntan January 11, 2010 04:13

I normally use parasolid files (.x_t) to import solid into gambit.
All the complex geometry i imported keep remain Real so far.

Take a try.


All times are GMT -4. The time now is 05:37.