Porous media and adjacent BCs

Carno · January 6, 2010, 07:01

Hi Experts,

I am modeling a housing which contains a heat exchanger, which I have modeled as porous medium. The HE is completely inside the housing. Now problem is that HE allows flow in one direction only (say x direction). So I made the X side walls of the porous medium as 'interior' BCs and remaining side walls as 'walls' with one side as porous medium and other side as fluid. The problem do not converge. But it converges as soon as I make all BCs as 'interior'. What could be the problem? Do porous media modeling allows two different BCs at interface?

NewMY · January 14, 2010, 00:54

Yes, porous media does allow two different BCs at interface, I have done the same few times already, never give me problem.
But I can't understand your problem, what you mean by 'So I made the X side walls of the porous medium as 'interior' BCs and remaining side walls as 'walls' with one side as porous medium and other side as fluid.'?
Usually, I defined the both surfaces at x-direction as interior, other surfaces as wall, meanwhile the volume as porous medium,
Is it same as yours?
Then is shouldn't be the problem.

January 6, 2010, 07:01	Porous media and adjacent BCs	#1
Carno Member carno Join Date: Mar 2009 Posts: 70 Rep Power: 17	Hi Experts, I am modeling a housing which contains a heat exchanger, which I have modeled as porous medium. The HE is completely inside the housing. Now problem is that HE allows flow in one direction only (say x direction). So I made the X side walls of the porous medium as 'interior' BCs and remaining side walls as 'walls' with one side as porous medium and other side as fluid. The problem do not converge. But it converges as soon as I make all BCs as 'interior'. What could be the problem? Do porous media modeling allows two different BCs at interface?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
POROUS MEDIA	Sean Cody	FLUENT	8	March 6, 2013 10:33
about porous media	major	FLUENT	5	March 6, 2013 10:00
Porous Media coupled with internal flow	Samuel Andrade	FLUENT	2	August 26, 2012 09:43
Modelling porous media	Rina	Main CFD Forum	0	April 10, 2002 10:01
Modelling porous media adjacent to viscous flow	Rina Lum	Main CFD Forum	1	March 25, 2002 16:55

January 14, 2010, 00:54		#2
NewMY New Member New Mei Yet Join Date: Mar 2009 Posts: 10 Rep Power: 17	Yes, porous media does allow two different BCs at interface, I have done the same few times already, never give me problem. But I can't understand your problem, what you mean by 'So I made the X side walls of the porous medium as 'interior' BCs and remaining side walls as 'walls' with one side as porous medium and other side as fluid.'? Usually, I defined the both surfaces at x-direction as interior, other surfaces as wall, meanwhile the volume as porous medium, Is it same as yours? Then is shouldn't be the problem.