CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

how to know temperature reference

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 25, 2010, 08:00
Default how to know temperature reference
  #1
New Member
 
opehterinar
Join Date: Jan 2010
Posts: 4
Rep Power: 7
opehterinar81 is on a distinguished road
Hi guys
I have a problem how to determine heat transfer coefficient. q (heat flux) = h (heat transfer coefficient) x delta T (skin temperature - temperature reference). In default, delta T is skin temperature - free stream temperature. But, how about mixing flow. How to get T reference. Thanks
opehterinar81 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Simulation of a single bubble with a VOF-method Suzzn CFX 18 October 2, 2009 04:18
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
Error with Wmake skabilan OpenFOAM Installation 3 July 28, 2009 00:35
OpenFOAM on MinGW crosscompiler hosted on Linux allenzhao OpenFOAM Installation 127 January 30, 2009 20:08
G95 + CGNS Bruno Main CFD Forum 1 January 30, 2007 01:34


All times are GMT -4. The time now is 06:55.