mass/heat transfer in Fluent
Hi anybody!
I'm new in Fluent and I want to simulate a turbulent heat and mass transfer in wavy wall. How to lunch mass transfer modelling in fluent? |
Procedure for CFD analysis
Hi,
you need to proceed in this way: 1) build your geometry in either gambit or icem 2) mesh it 3) export the mesh 4) read the mesh in fluent 5) run the simulation 6) check your results I would suggest to start with gambit tutorials, then fluent tutorials. Tony |
Dear tony00,
Thank you for your answer, I already treated some example with Fluent. for this case, I have already do everything (building the geometry, exporting the mesh ....) but the problem it is how to make for mass transfer. |
Mas transfer
Hi,
you need to specify your problem a bit if you want some help. It is not clear to me what you mean. All the best |
Dear tony00,
Firstly, I launched a simulation to validate the commercial code Fluent in 2D and 3D (steady and unsteady) and I compared my results with those of Maaß and Schumann and I had very good results. http://cfd.mace.manchester.ac.uk/cgi...as77_rsol.html Now, I want to see the effect of wave amplitude (various amplitudes) on heat and mass transfer. |
hi Khaled
it me aounallah, I think that you need to concentrate only on mass transfer (the thermal transfer is quite easy to you to do it ) you can refomulate your question asking how to simulate only the mass transfer in a simply 2D geometry (fluid, procedure,steps) good luck , I will inform you if I found something in this field |
All times are GMT -4. The time now is 02:55. |