post processing discrete phase with paraview

mighelone · March 2, 2010, 03:41

Hello to everybody,

generally I use paraview to postprocess my fluent simulations, exporting data in ensight format.

The procedure works very well, but I don't know how to post-process discrete phase particle trajectories.

Do you have any idea how to export DPM trajectories in an external post-process program, and in particular in Paraview?

Best regards

Michele

Qloverchina · July 24, 2013, 04:00

Hi,mighelone. I have been faced with several problems. I wonder if you have the solutions.,and can you tell me how to do it?

bazinga22 · March 7, 2021, 21:02

I also am looking for this solution!! need to model unsteady DPM data from fluent in paraview!

dominicafonso · March 9, 2021, 04:34

Have you found file>export>particle history data?
Alternatively, there is an option to write step-by-step track data from the Graphics>Particle Tracks set up dialogue.

Data relating to specfic boundarys can be collected from Report>Discrete Phase>Sample

What I am struggling with is exporting any record of track history that includes the fate of the track. I'd really like to isolate escaped tracks from trapped tracks. I think I may have to do some work on the data outside of fluent and then import for postprocessing.

March 2, 2010, 03:41	post processing discrete phase with paraview	#1
mighelone Member Michele Vascellari Join Date: Mar 2009 Posts: 70 Rep Power: 17	Hello to everybody, generally I use paraview to postprocess my fluent simulations, exporting data in ensight format. The procedure works very well, but I don't know how to post-process discrete phase particle trajectories. Do you have any idea how to export DPM trajectories in an external post-process program, and in particular in Paraview? Best regards Michele

July 24, 2013, 04:00	post processing discrete phase with paraview	#2
Qloverchina New Member 张健 Join Date: Jul 2013 Posts: 1 Rep Power: 0	Hi,mighelone. I have been faced with several problems. I wonder if you have the solutions.,and can you tell me how to do it?

March 9, 2021, 04:34	post processing discrete phase with paraview	#4
dominicafonso New Member Dominic Join Date: Feb 2015 Posts: 12 Rep Power: 11	Have you found file>export>particle history data? Alternatively, there is an option to write step-by-step track data from the Graphics>Particle Tracks set up dialogue. Data relating to specfic boundarys can be collected from Report>Discrete Phase>Sample What I am struggling with is exporting any record of track history that includes the fate of the track. I'd really like to isolate escaped tracks from trapped tracks. I think I may have to do some work on the data outside of fluent and then import for postprocessing.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
continuous and discrete phase coupling in fluids-HELP	atmcfd	Main CFD Forum	1	December 30, 2009 23:02
paraFoam reader for OpenFOAM 1.6	smart	OpenFOAM Installation	13	November 16, 2009 21:41
[OpenFOAM] Paraview shuts down when post processing of icoFoam	jin_xu	ParaView	1	June 1, 2008 19:01
[General] Flow3d post processing with ParaView	Rajiv Kothari	ParaView	0	May 24, 2007 09:00
Post Processing in FEM	Abhijit Tilak	Main CFD Forum	0	April 26, 2004 11:59

March 7, 2021, 21:02		#3
bazinga22 New Member Bella Barbera Join Date: Nov 2020 Posts: 6 Rep Power: 5	I also am looking for this solution!! need to model unsteady DPM data from fluent in paraview!