CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

y+ values for DES

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 19, 2010, 04:06
Default y+ values for DES
  #1
CFT
New Member
 
CFT
Join Date: Mar 2009
Posts: 15
Rep Power: 7
CFT is on a distinguished road
Hi all

As far as I understand the DES uses RANS model at the boundary instead of wall function. However I notice in the results of the turbulence there is a y+ term. Can someone explain ?

thanks
CFT
CFT is offline   Reply With Quote

Old   March 19, 2010, 04:13
Default
  #2
New Member
 
Join Date: Mar 2009
Posts: 25
Rep Power: 7
denizen is on a distinguished road
rans models at boundary works as usual (with and without wall function) it depends on options you choise.
denizen is offline   Reply With Quote

Old   April 20, 2010, 18:55
Default
  #3
Senior Member
 
Join Date: Feb 2010
Posts: 145
Rep Power: 7
Jade M is on a distinguished road
Under "Meshing Requirements for DES," the manual states "The grid resolution requirement in the attached boundary layers is the same as that of a regular RANS solution (10-15 nodes in the boundary layer). In the DES region, the grid has to be designed in all three space dimensions to allow at least the resolution of the largest turbulent structures. As the largest grid spacing is used in the switch for the DES limiter, it is essential to have sufficient resolution in the spanwise direction (if it exists)."

Nothing is mentioned about y+. I would suspect that it shows up in the results for informational purposes or left over from RANS but that it's not critical? I'm not expert though.
Jade M is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
TimeVaryingMappedFixedValue irishdave OpenFOAM Running, Solving & CFD 26 July 24, 2014 05:30
Ensight - node values -cell values leo FLUENT 1 May 12, 2010 09:47
max node values exceed max element values in contour plot jason_t FLUENT 0 August 19, 2009 12:32
exact face values RubenG Main CFD Forum 0 June 22, 2009 12:09
strange node values @ solid/fluid interface - help JB FLUENT 2 November 1, 2008 14:04


All times are GMT -4. The time now is 09:59.