CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Turbulence Model Problems

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 29, 2010, 18:31
Default Turbulence Model Problems
  #1
New Member
 
Luke
Join Date: Mar 2010
Posts: 1
Rep Power: 0
ttlg is on a distinguished road
Hello All
I'm having a problem on Fluent when I switch from k-e r to a k-w sst model. When I used the k-e model I had no problems and I obtained a solution fine. Now that Ive changed to the k-w sst my solution keeps diverging although everything else is kept the same from the previous model. Any ideas of why this is and how to solve it?

Thanks for your help
ttlg is offline   Reply With Quote

Old   March 30, 2010, 02:02
Default
  #2
Senior Member
 
Philipov's Avatar
 
Svetlin Philipov
Join Date: Mar 2009
Location: United Kingdom
Posts: 176
Rep Power: 8
Philipov is on a distinguished road
turbulent models must be chosen according to the flow type. The mesh need to be changed too...
Philipov is offline   Reply With Quote

Old   April 8, 2010, 04:54
Post heidar
  #3
Member
 
heidar jafarizadeh
Join Date: Mar 2010
Location: Iran- Tehran
Posts: 43
Rep Power: 7
heidar is on a distinguished road
in fluent the K-w turbulence model uses one eqution model to resolve the flow structure near wall. whereas the K-e model can uses the 3 type of near waal solution. using one eqution model for near wall treatments leads us to beter results but u have to increase the mesh density.
ok go on and increase mesh density
but be care that now u could not compaire the two answer of K-e and K-w.
bye
heidar is offline   Reply With Quote

Old   May 3, 2010, 04:26
Default Yplus
  #4
Member
 
ali
Join Date: May 2009
Posts: 58
Rep Power: 8
alikami is on a distinguished road
Check values of yplus ....
If you have seperated flow try SST but be sure to have low yPLUS ~1 (i guess).

SST uses kw in near wall and ke in inner region ....
In case you dont have seperation better use ke , computationally good
Regards
Ali
alikami is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
multiphaseInterFoam for RAS turbulence model chiven OpenFOAM Bugs 7 August 23, 2011 02:52
Problems bout CFD model of biomass gasification, Downdraft gasifier wanglong FLUENT 2 November 26, 2009 00:27
Implementing and running a new turbulence model svens OpenFOAM 3 August 21, 2009 02:59
v2-f turbulence model in CFX? flga CFX 14 November 23, 2006 07:12
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model Jonas Larsson FLUENT 5 March 13, 2000 04:27


All times are GMT -4. The time now is 13:23.