CFD Online Logo CFD Online URL
Home > Forums > FLUENT

DPM champion

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 9, 2010, 01:59
Default DPM champion
Senior Member
Mohsin Mukhtar
Join Date: Mar 2010
Location: South Korea
Posts: 249
Rep Power: 9
Mohsin is on a distinguished road

When i used "group" injections in DPM injection panel I got the message "lost 32 new injected particles on last node", I don't know what this means and how to solve it. My injection center point is (0,0,60) from center (0,0,0).

First point Last point
X position=-3.8 X position=3.8
Y position=-3.8 Y position=3.8
Z position=60 Z position=60

The upper inlet is 60 (positive z direction) from the center (0,0,0). The upper inlet circle's radius is 3.8 from where the particles are supposed to come. So from -3.8 to 3.8 in x and y direction the 100 particles would be injected (as the particle stream is 100).

Please tell me how to avoid this problem.Helpppppppp
Mohsin is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
DPM - Solid reaction sega Fluent UDF and Scheme Programming 3 April 13, 2014 21:58
DPM modeling Mohsin FLUENT 0 March 31, 2010 22:11
DPM - do the particles affect the liquid? Nikhil Dani FLUENT 0 January 1, 2009 12:58
slow after mesh for enhanced wall treat DPM joshkemp FLUENT 0 May 1, 2007 17:20
DPM and LES R.Sripriya FLUENT 3 May 13, 2003 22:48

All times are GMT -4. The time now is 02:10.