Meaning of Boundary Types

brikksss · April 25, 2010, 13:07

Hello,
I`m working with Gambit on a 3-D modelling, pratically a 3-D section of one blade of a rotor. I have just completed the mesh, and now I have to set the boundary types in order to export the geometry in Fluent.
Because I`m a novice user, I tried to find on the Gambit-Help information about the commands "TYPE" applicable to the components of the geometry, such as WALL, AXIS, INTERIOR, INTERNAL.....and I have seen that there are very poor informations, pratically it doesn`t say nothing about the feat of the commands.
I know that is very difficult explain my geometry in order to fix my problem, so I want to ask you if there is a guide/manual on the web or a paper that you can send me with detailed informations about the Boundary Types applicable.

I hope this thread will be useful for all the users who, like me, are looking for this kind of informations!

Best regards,

-mAx- · April 26, 2010, 01:08

Explanations about BC could be found in Fluent Users Guide

April 25, 2010, 13:07	Meaning of Boundary Types	#1
brikksss New Member Diego Join Date: Apr 2010 Posts: 4 Rep Power: 16	Hello, I`m working with Gambit on a 3-D modelling, pratically a 3-D section of one blade of a rotor. I have just completed the mesh, and now I have to set the boundary types in order to export the geometry in Fluent. Because I`m a novice user, I tried to find on the Gambit-Help information about the commands "TYPE" applicable to the components of the geometry, such as WALL, AXIS, INTERIOR, INTERNAL.....and I have seen that there are very poor informations, pratically it doesn`t say nothing about the feat of the commands. I know that is very difficult explain my geometry in order to fix my problem, so I want to ask you if there is a guide/manual on the web or a paper that you can send me with detailed informations about the Boundary Types applicable. I hope this thread will be useful for all the users who, like me, are looking for this kind of informations! Best regards,

April 26, 2010, 01:08		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	Explanations about BC could be found in Fluent Users Guide __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
inlet velocity boundary condition	murali	CFX	5	August 3, 2012 08:56
boundary condition_vof model	garima chaudhary	FLUENT	0	October 9, 2007 02:08
specifying boundary types in gambit??	gayazullah	FLUENT	4	May 15, 2003 11:57
Boundary Types in Fluent 5/6	Oresko	FLUENT	3	July 23, 2002 19:23
Boundary Conditions	Jan Ramboer	Main CFD Forum	11	August 16, 1999 08:59