CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   create a probe with fluent (http://www.cfd-online.com/Forums/fluent/75549-create-probe-fluent.html)

Aenseeiht April 28, 2010 12:05

create a probe with fluent
 
dear all,

I want to create a probe in fluent to assess the temperature field. In fact, i have an experimental profil of the temperature field that I want to compare to the results given by fluent. Unfortunately, the probes used to do the mesures are not protected from radiation.

So, my idea is to create a probe in the domain of calculation to see its temperature and compare it to the one given by the experiment.

I have tried to do this by making a cylinder, but without sucess beacause this method demand to give a bounadary condition to this cylinder.

Does some know a better idea to achieve my comparaion or a better suggestion to create the probe.

Regards

Aenseeiht

-mAx- April 29, 2010 01:07

create a point or a rake in fluent, and monitor your results on those entities

Aenseeiht April 29, 2010 03:25

Thank you mAx for tour suggestion,

The probleme with you suggestion is that i cant not incule the radiation on the probe. In fact

Aenseeiht April 29, 2010 03:27

Thank you mAx for your suggestion,

The probleme with you suggestion is that i cant not incule the radiation on the probe. In fact i need to inculde it on the prob beacause the probes used to do the mesures were not protected from the radiation.

Regards
Aenseeiht


All times are GMT -4. The time now is 02:07.