Fluent PEMFC add-on modul

kidloco · June 21, 2010, 15:03

Dear all,

I am wondering is it possible to made a 2-D model in Fluent PEMFC-modul?

I didn't have any problems with 3-D model. After i create my geometry in Gambit and meshing and defining boundary conditions i simply load a case in 3D fluent.

I also try with 2-D in x-y plane but after solving in fluent i didn't get solution (i get 0 current density for anode and cathode).

Also i would like to ask, for which exchange current density for anode and cathode you get the most realistic results (polarization curve)?

Thank you for your answers,

Regards, Ivor

bob12 · June 23, 2010, 03:05

hi
i use a sofc model but don't function well because some user memory are 0 all field in 3D simulation. how many strate of cathode and anode you use?
thank you
any suggestions are welcome

ender · June 23, 2010, 03:32

I am working on 3-D single straight channel pem electrolyzer model.
Pem electrolyzer model is working, but outputs are incorrect. I am collecting oxygen from anode.

Quote:

Originally Posted by bob12

hi
i use a sofc model but don't function well because some user memory are 0 all field in 3D simulation. how many strate of cathode and anode you use?
thank you
any suggestions are welcome

elemad1987 · August 7, 2012, 07:26

guess what happen History repeat it self.

I have the same problem as you

I am using the Fluent 14 and I want to simulate a PEM fuel cell.
The only tutorial of PEM fuel cell of Fluent is from 6.3 version.
I use it to Fluent 14 and I follow the steps but the results does not the same, also some data and parameters are different.

Anybody know if the tutorial of 6.3 Fluent is working to Fluent 14 too?
I think now you had finish your thesis peacefully.
Can you help me to overcome my problems.
or send me your cas files
Thank you
Emad G.
elemad1987@gmail.com

June 21, 2010, 15:03	Fluent PEMFC add-on modul	#1
kidloco New Member Join Date: Jun 2010 Posts: 1 Rep Power: 0	Dear all, I am wondering is it possible to made a 2-D model in Fluent PEMFC-modul? I didn't have any problems with 3-D model. After i create my geometry in Gambit and meshing and defining boundary conditions i simply load a case in 3D fluent. I also try with 2-D in x-y plane but after solving in fluent i didn't get solution (i get 0 current density for anode and cathode). Also i would like to ask, for which exchange current density for anode and cathode you get the most realistic results (polarization curve)? Thank you for your answers, Regards, Ivor

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Integration of a Custom C++ Model into FLUENT	Syed Haider	FLUENT	2	March 6, 2018 23:37
How to open Icem mesh in Ansys Fluent?	emmkell	FLUENT	27	February 6, 2018 03:34
Master node in parallel computing only distirubtion	syadgar	FLUENT	1	September 8, 2009 16:41
On Bug of Fluent 12.0	lzgwhy	FLUENT	0	August 26, 2009 06:41
HOW TO ADD ENERGY SOURSE IN FLUENT!	Devy	FLUENT	0	March 22, 2001 06:08

June 23, 2010, 03:05		#2
bob12 Member Join Date: Oct 2009 Location: Italy Posts: 88 Rep Power: 16	hi i use a sofc model but don't function well because some user memory are 0 all field in 3D simulation. how many strate of cathode and anode you use? thank you any suggestions are welcome

August 7, 2012, 07:26		#4
elemad1987 New Member Emad Join Date: Feb 2012 Location: Egypt Posts: 26 Rep Power: 14	guess what happen History repeat it self. I have the same problem as you I am using the Fluent 14 and I want to simulate a PEM fuel cell. The only tutorial of PEM fuel cell of Fluent is from 6.3 version. I use it to Fluent 14 and I follow the steps but the results does not the same, also some data and parameters are different. Anybody know if the tutorial of 6.3 Fluent is working to Fluent 14 too? I think now you had finish your thesis peacefully. Can you help me to overcome my problems. or send me your cas files Thank you Emad G. elemad1987@gmail.com