CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Granular Temperature?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 7, 2010, 12:49
Default Granular Temperature?
  #1
New Member
 
Join Date: Jul 2010
Posts: 2
Rep Power: 0
g0dmaphia is on a distinguished road
Hi i have a problem with a 3d simulation of an high pressurized bottle (70 bar) discharging a powder into an engine bay (modelled as a big cilynder). The model i use is a Mixture model with Nitrogen Ideal and this powder as 2nd phase (patched at the end of the bottle, near the exit nosel)... the problem is that when i start the simulation i always get high temperatures and the solution diverges immediatly.

I think it is related with the granular temperature of the powder, cause i donīt know what is it and what should be a good value to set...

I think that the mesh is good, it is HEXA with determinants all over 0.3 and angles over 27°...

Thanks in advance
g0dmaphia is offline   Reply With Quote

Old   July 8, 2010, 10:24
Default
  #2
Member
 
Amol Ramteke
Join Date: May 2009
Location: Kolkata
Posts: 30
Rep Power: 8
Goldsstean is on a distinguished road
Granular Temperature is not temperature. It is the kinetic energy posses by the particle before collussion
Goldsstean is offline   Reply With Quote

Old   July 8, 2010, 10:40
Default
  #3
New Member
 
Join Date: Jul 2010
Posts: 2
Rep Power: 0
g0dmaphia is on a distinguished road
yes i know, but i donīt know what is a good value for my case... i thought that setting a strange value could screw up my simulation and let fluent going nuts (high temp, high viscosity ratios and so on)..

Default value is 0.0001 but i donīt know if it is good or not for my simulation, do you have any experience with granular flow? My particles are really small, something like 5 micrometers...

Thanks
g0dmaphia is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 06:27
UDF with Granular Temperature meangreen Fluent UDF and Scheme Programming 0 February 14, 2010 18:58
Eliminating exchange energy between phase in Granular Temperature diff eqn. cfdbusiness FLUENT 0 February 2, 2010 23:30
the maximum value of granular temperature haijj FLUENT 0 August 25, 2008 05:02
Access Granular Temperature in UDF Gavin FLUENT 5 July 22, 2005 11:06


All times are GMT -4. The time now is 23:00.