CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Fluent 12 Journal File Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 15, 2010, 13:38
Default Fluent 12 Journal File Problem
  #1
New Member
 
Krishan Parmar
Join Date: Jan 2010
Posts: 7
Rep Power: 16
Krish is on a distinguished road
Hi I have written a journal file in Fluent 12.

My previous journal was in Fluent 6 and I could write:

read-case
/home/location/gambit.msh

But with Fluent 12, I cannot get the syntax right to get locate the file where the mesh is stored.

For example, Fluent 12 writes:

/file/read-case "gambit.msh"

When I change this to :
/file/read-case "/home/location/gambit.msh"

This does not recognise the path and fails to load the file

Any ideas anyone.

Thanks in advance

Krish
Krish is offline   Reply With Quote

Old   July 16, 2010, 02:12
Default
  #2
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41
-mAx- will become famous soon enough
*did you try without "..."
*else start fluent from your working directory (where your mesh file is stored), then you shouldn't have problem any more, since you don't have to specify any path
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Old   July 16, 2010, 07:10
Default
  #3
New Member
 
Krishan Parmar
Join Date: Jan 2010
Posts: 7
Rep Power: 16
Krish is on a distinguished road
Quote:
Originally Posted by -mAx- View Post
*did you try without "..."
*else start fluent from your working directory (where your mesh file is stored), then you shouldn't have problem any more, since you don't have to specify any path
Hi, thanks for your reply. I have tried numerous different syntax with no joy.

Starting from the working directory is not really an option. I am running an optimization code and moving files to make it work would make the code and output very messy.

Thanks for your help

Krish
Krish is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to comment a Fluent journal file Bottenheim FLUENT 9 December 29, 2022 20:15
wmake compiling new solver mksca OpenFOAM Programming & Development 14 June 22, 2018 07:29
[blockMesh] BlockMesh FOAM warning gaottino OpenFOAM Meshing & Mesh Conversion 7 July 19, 2010 15:11
[Gmsh] Compiling gmshFoam with OpenFOAM-1.5 BlGene OpenFOAM Meshing & Mesh Conversion 10 August 6, 2009 05:26
[OpenFOAM] Paraview command not found hardy ParaView 7 September 18, 2008 05:59


All times are GMT -4. The time now is 08:51.