# jet pum

 Register Blogs Members List Search Today's Posts Mark Forums Read

 July 25, 2010, 00:54 jet pum #1 New Member   aime marthial Join Date: Mar 2010 Posts: 14 Rep Power: 7 hi everyone does someone have any idea how to modeling high velocity flow in ejector( as the one use in refrigeration cycle) but in my present case the fluid is water-vapor ,the primary flow has velocity in order of 200m/s at 100C of temperature and the secondary flow has a pressure in order 6000Pa and temperature of 45C the represent view of the ejector is given with this linkhttp://ijlct.oxfordjournals.org/cgi/...4/1/2/CTN001F2 i already try what i can but i don' have any good result, if someone have any tutorial or any ideas which can help me i will be glad thank to take your time to read me

 July 31, 2010, 06:45 #2 New Member   Tomek Join Date: Jul 2010 Posts: 5 Rep Power: 7 I simulated very similar model. It was lowpressure ejector of domestic burners. I have two streams of gas: natural gas and air (primary air). I used model: species transport. Thanks for this model i get density which value was consequence of mixing of this two streams. So this model was kind of ejector because velocity of gas (about 80 m/s) make that the air was suck in to burners. Sorry for my english. It is polish-english

 July 31, 2010, 07:38 #3 New Member   aime marthial Join Date: Mar 2010 Posts: 14 Rep Power: 7 thank Tomek to take your time replying me ,my English is not good too so in your work you used two different fluid that it?how low was pressure you used? because i realized that the high pressure i use maybe the real problem..

 July 31, 2010, 11:47 #4 New Member   Tomek Join Date: Jul 2010 Posts: 5 Rep Power: 7 I used one phase (gas phase). One gas it was natural gas, second gas was air - I simulated how domestic burner work. The pressure of natural gas was 2000 Pa (pressure above atmospheric), the pressure of air was O Pa (my boundary conditions). If you choose model 2D try to use model 3D. When I use model 2D the result was far-away from correct answer.

 July 31, 2010, 11:53 #5 New Member   Tomek Join Date: Jul 2010 Posts: 5 Rep Power: 7 I think the level of pressure is not problem. It's depend on size your diameter. I used the nozzle with diameter 1,07 [mm], the gauge pressure 2000 Pa caused max speed flow about 80 m/s in the nozzle.

 August 3, 2010, 10:09 #6 New Member   aime marthial Join Date: Mar 2010 Posts: 14 Rep Power: 7 thank u for your indications and sorry to reply little late i have been busy with others stuff i will then first try to use a 3D model and see if i get better result, i work with a diameter of 2.4mm , i will let u know what i get, thank you again for your time

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post doug Main CFD Forum 10 October 16, 2013 00:47 ahlo7 CFX 7 March 7, 2012 11:25 Fred CFX 5 February 11, 2007 13:01 Fred Main CFD Forum 0 February 8, 2007 14:15 Amir Omoumi Main CFD Forum 10 August 30, 1999 22:11

All times are GMT -4. The time now is 11:32.