CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Pressure-Outlet boundary condition for species

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 29, 2010, 06:08
Default Pressure-Outlet boundary condition for species
  #1
New Member
 
Irina
Join Date: Mar 2009
Location: Russia
Posts: 3
Rep Power: 8
Itsme is on a distinguished road
Dear colleagues,

Does somebody aware if it is correct to put species mass fraction equal 1 at the outlet-pressure BC while two species in the flow are presented? E.g. I have two inlets, one pure air and the second one of pure helium. Then how could I manage the BC at outlet for the species fractions? Is it wrong to put air species=const=1?

Thanks in advance.
Itsme is offline   Reply With Quote

Reply

Tags
fluent, pressure-outlet, species

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Turbulent intensity for pressure Outlet Boundary condition Mohsin FLUENT 1 April 30, 2010 10:36
Outlet boundary condition =/ AdidaKK CFX 4 December 4, 2009 09:12
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
outlet boundary condition for compressor modeling siamak1424 FLUENT 3 August 8, 2009 05:55
Pressure boundary condition C-H Kuo Main CFD Forum 9 August 28, 1998 12:07


All times are GMT -4. The time now is 09:04.