CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

modeling thermal resistance in Fluent?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 28, 2010, 10:28
Default modeling thermal resistance in Fluent?
  #1
Member
 
Join Date: Mar 2009
Posts: 43
Rep Power: 17
gholamghar is on a distinguished road
Hello
I am modeling a pin fin heatsink with gambit and fluent,is there any way that i can model the thermal resistance between the fins and the base plate of the heatsink? because my heatsink is not made from methods like cold forge,first the base plate is drilled so that some holes are made in the base plate and then the fins are pressed into the holes and because of this there is a thermal resistance between the base plate and fins.any help would be of great appreciations.
Regards
gholamghar is offline   Reply With Quote

Old   August 28, 2010, 13:07
Default
  #2
Senior Member
 
xrs333
Join Date: Aug 2010
Posts: 125
Rep Power: 16
xrs333 is on a distinguished road
you can use the so-called thin-wall resistance model, which is set in the wall boundary condition panel, for the modeling of the heat resistance between the surfaces of the fin and the hole in the plate. But the resistance itself must be known.
xrs333 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Multiphase flow modeling: CFX or FLUENT? Paul Main CFD Forum 8 January 24, 2012 10:25
Fluent jobs through pbs ibnkureshi FLUENT 5 June 9, 2011 14:43
Contact modeling in FLUENT pchama1 ANSYS 3 May 27, 2011 17:34
Is FLUENT capable of Modeling Breaking Waves Justin FLUENT 0 June 29, 2009 01:03
Modeling Hydrodynamics in Estuaries using FLUENT SUMAN KHAMRAI FLUENT 1 December 23, 2005 17:55


All times are GMT -4. The time now is 21:07.