CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Double layer Microchannel - Flow and Heat transfer

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 7, 2010, 21:04
Default Double layer Microchannel - Flow and Heat transfer
  #1
New Member
 
Join Date: Mar 2010
Posts: 7
Rep Power: 16
priyanka.asp is on a distinguished road
I am solving 3d flow and conjugate heat transfer in a double layered micro-channel. I am considering half of the channel due to symmetry. I have a velocity inlet for both the layers, and a fully developed conditions( both hydro dynamically and thermally) at the outlet, so an outflow at the outlet. I have coupled walls near the solid-fluid interface. I have constant heat flux at the bottom of the channel. Rest all are walls.

I am running a 3d steady, laminar case and the solution is not converging. The mass flow rate is being balanced. SO can anyone let me know where I am going wrong?
priyanka.asp is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Convective / Conductive Heat Transfer in Hypersonic flows enigma Main CFD Forum 2 November 1, 2009 23:53
Natural convection - Inlet boundary condition max91 CFX 1 July 29, 2008 21:28
heat transfer in two-phase flow Leonid Fromzel CFX 0 April 8, 2008 06:57
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 15:09.