CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   FLUENT (2D simulation) (http://www.cfd-online.com/Forums/fluent/79915-fluent-2d-simulation.html)

virginia September 8, 2010 09:07

FLUENT (2D simulation)
 
Hi,

I have to simulate a two-phase flow through a rotor of a turbine. Before simulate the entire blade I have to simulate just the tip section, so a 2D simulation.

My question is " how Fluent calculate the mass flow rate (kg/s) in 2D domain?
that is, if I assign the mass flow rate, in the boundary condition of a 2D simulation, how Fluent calculate the hieght of the section?"

I apologize for my english!

ghost82 January 24, 2011 16:38

Anybody can help us?
I'm also curious for this answer.

Daniele

vig January 26, 2011 00:24

Summation of face area for 2D problem gives height.

laurentb January 28, 2011 03:24

http://www.cfd-online.com/Forums/flu...s-flow-2d.html


All times are GMT -4. The time now is 03:03.