CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Help: Third-order MUSCL for flame propagation?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 7, 2010, 13:19
Default Help: Third-order MUSCL for flame propagation?
  #1
New Member
 
Join Date: Mar 2009
Posts: 19
Rep Power: 17
fireman is on a distinguished road
I find this from FLUENT HELP:Compared to the second-order upwind scheme, the third-order MUSCL has a potential to improve spatial accuracy for all types of meshes by reducing numerical diffusion, most significantly for complex three-dimensional flows, and it is available for all transport equations.
But, The third-order MUSCL currently implemented in FLUENT does not contain any flux-limiter. As a result, it can produce undershoot and overshoot when the flow-field under consideration has discontinuities such as shock waves.

So can I use MUSCL scheme for simulation of flame propagation? I am not sure that if the flame front has such kind of discontinuities. Thank you!
fireman is offline   Reply With Quote

Old   October 13, 2010, 08:59
Default
  #2
New Member
 
sreenivasa rao gubba
Join Date: Sep 2010
Location: Leeds University, UK
Posts: 28
Rep Power: 15
sreerao is on a distinguished road
Hi

When you say flame propagation, Can I assume it as premixed flame? Is it in 2D or 3D that you want to simulate?

For instance premixed flames in turbulent situation are not continuous. However, these discontinuties are mainly dependent on your local flow field. If you are using RANS to simulate this problem, I would give it a try and see the difference with different schemes.

Sree
sreerao is offline   Reply With Quote

Old   October 13, 2010, 13:17
Default
  #3
New Member
 
Join Date: Mar 2009
Posts: 19
Rep Power: 17
fireman is on a distinguished road
Quote:
Originally Posted by sreerao View Post
Hi

When you say flame propagation, Can I assume it as premixed flame? Is it in 2D or 3D that you want to simulate?

For instance premixed flames in turbulent situation are not continuous. However, these discontinuties are mainly dependent on your local flow field. If you are using RANS to simulate this problem, I would give it a try and see the difference with different schemes.

Sree
Hi, Sree

Thank you. I am doing 3D LES simulation of premixed flame propagation in a closed vessel. The flame undergoes laminar and turbulent regime.
fireman is offline   Reply With Quote

Old   October 13, 2010, 13:33
Default
  #4
New Member
 
sreenivasa rao gubba
Join Date: Sep 2010
Location: Leeds University, UK
Posts: 28
Rep Power: 15
sreerao is on a distinguished road
Hi

I would dare to try if my flame is in thin reaction zone regime of the combustion diagram. Again it is purely based on what u' i am using. if it is highly turbulent, i would expect discontinuties.

-Sree
sreerao is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
IS calc. with 2nd order discret. always necessary? Azman FLUENT 2 March 14, 2013 05:28
1st order vs 2nd order ken FLUENT 8 March 14, 2013 04:43
How to compute UDS fourth order gradient Emma66 FLUENT 1 April 27, 2010 06:44
Unstable flow simpleFoam 2nd order Valle OpenFOAM 0 August 26, 2009 09:12
CFL condition for higher order schemes Shyam Main CFD Forum 2 February 14, 2008 15:24


All times are GMT -4. The time now is 12:57.