Fluent 6.3 / Gambit 2.3.16 / Exceed 11 problem on Win7

pdilly · November 5, 2010, 17:34

My Fluent installation runs fine on Win7 x64, but I get the following problem when i try to start Gambit, after first launching exceed. I've tried the usual things like disabling firewall --- any ideals what might be causing this ? Many thanks.

"Locating Exceed installation ...
gambit failed in locating Exceed installation on your system.
Please try to start Exceed manually before you run gambit.
Starting C:\Fluent.Inc\gambit2.3.16\ntx86\gambit.exe -device open -id default_id2012 -new ...
Gambit build SP2006032921.
Warning : The current transport does not permit the attempted TCPIP connection.
TRANS(SocketINETGetAddr): tnamebysocket() failed
TRANS(SocketINETConnect): TRANS(SocketINETGetAddr) () failed
TRANS(Open): transport open failed for tcp/Paul-Win7:0
Unable to open display"

saha2122 · November 6, 2010, 10:08

hi pdilly !

i had this problem too!!
finally i download XpMode from microsofts site ! then i run fluent in 7 !!!! but Gambit is on the XpMode !!! its realy intresting!!!

try it !!!!!! u can install gambit on 7 32bit!!!! but i think its not possible to install it on the 64bit !!!!!!

good luck
SaHa

vinerm · November 7, 2010, 10:08

I am not really sure of Windows 7. However, it only means that Exceed is not installed at the location where Gambit expects it to be. So, just reinstall Exceed and make sure you do not alter it's location of installation. If it is installed at default location, then may be the version is not right for Windows 7. Fluent does not need X-server, therefore, runs properly.

pdilly · November 7, 2010, 11:46

Thanks for responses. I got the free VMWare player (what a great piece of software www.vmware.com), installed a winXP 32 virtual machine, then installed Gambit on on the virtual machine and it works fine (eventually). By sharing the directory location, the meshed gambit files in the XP virtual machine can be accessed from outside, by Fluent running in Win7 ... cool.

pdilly

dresden · November 22, 2010, 08:18

i have installed vwmare player but how to install windows xp virtual machine,plz let me know..

dresden · November 22, 2010, 08:19

Quote:

Originally Posted by dresden

i have installed vmware player but how to install windows xp virtual machine,plz let me know..

pdilly its for u

pdilly · November 22, 2010, 08:36

Start VMWare Player, click "File / Create a New Virtual machine"
Insert your Win XP installation CD, then select "Installer disc" and install from there. You'll probably have to activate the Win XP installation (i did mine by phone).

dresden · November 23, 2010, 07:10

i have installed xp and then exceed and gambit but it is still not working and showing the folloewing message:
Gambit build SP2006032921.
Cannot open connect stream.
TRANS(SocketINETGetAddr): tnamebysocket() failed
TRANS(SocketINETConnect): TRANS(SocketINETGetAddr) () failed
TRANS(Open): transport open failed for tcp/kartik-0a5ee45d:0
Unable to open display

pdilly · November 23, 2010, 08:01

Check that your firewall is disabled.

FabioT · November 23, 2010, 18:35

Hi!
Sorry but I need some help

... I am going crazy with the installation and keeps on giving the same error... Even with the WindowsXP mode..

I have windows7 64bit..

Can somebody give me the exact steps to run it please??
It is really important for College and I need it tomorrow possibly....

Thank you very much!

(if anybody has some files to send to me just send me a pvt msg and we can email each other!)

Fabio

pdilly · November 24, 2010, 04:25

I've got Win7 64 also, Fluent works fine on it. For Gambit, I didn't use Win XP mode, but used VMWare player instead, installed a Win XP 32 virtual machine, and installed Hummingbird Exceed and Gambit on the virtual machine. As long as the firewall on the virtual machine is disabled, it works fine.

FabioT · November 24, 2010, 04:33

hi, sorry what is the difference between xpmode and xp virtual machine?

fluent works on my laptop with no problems, too.

thanks,

pdilly · November 24, 2010, 04:49

I suggest you get a copy of "VMWare Player" ... see www.vmware.com/products/player/

It's free! When you've installed it, you can then install a Win XP system as a "virtual" PC within your Win7 64 machine. You'll need a Win XP installation CD to do so. When XP is installed, then install Exceed, Gambit, disable firewall ... and you should be good to go.

saha2122 · November 29, 2010, 13:03

Hi Fabio
I think that you forget to copy the licence of gambit after installation !!

Quote:

Originally Posted by FabioT

Hi!
Sorry but I need some help

... I am going crazy with the installation and keeps on giving the same error... Even with the WindowsXP mode..

I have windows7 64bit..

Can somebody give me the exact steps to run it please??
It is really important for College and I need it tomorrow possibly....

Thank you very much!

(if anybody has some files to send to me just send me a pvt msg and we can email each other!)

Fabio

FabioT · November 29, 2010, 13:04

Hi thanks but I solved it looking for another version.
Bye

dresden · December 3, 2010, 03:47

I have done everything possible to run gambit on my laptop but in vain, as I am still not able to open it and the same msg appears that i have put in the last post.Plz help me.

FabioT · December 3, 2010, 03:56

Quote:

Originally Posted by dresden

I have done everything possible to run gambit on my laptop but in vain, as I am still not able to open it and the same msg appears that i have put in the last post.Plz help me.

Did you try version 2.4.6 with Exceed 11?
Good luck,

Fabio

Pat.Walsh · December 13, 2010, 16:56

Okay, here's how you run Gambit 2.3.16 on Windows 7 64 bit with Exceed 2006 (V11). I know, I didn't think it could be done either so no need for Windows XP emulators anymore. Surprisingly it's an extremely obvious and simple solution!

1) Go to Hummingbird Exceed in start menu and start Exceed manually.

2) Go to Fluent in Start menu and start Gambit

3) A gambit start menu will appear

4) The menu defaults to c:\windows\system.. but this is wrong

5) Browse to C:\Program Files (x86)\Hummingbird\Connectivity\11.00\Exceed

6) Click 'OK' and hey presto, Gambit starts perfectly!

No reason why this wouldn't work for any other version of Exceed as well so long as you point the Gambit install to the correct Exceed folder.

Flougiman · February 4, 2013, 06:27

Quote:

Originally Posted by pdilly

My Fluent installation runs fine on Win7 x64, but I get the following problem when i try to start Gambit, after first launching exceed. I've tried the usual things like disabling firewall --- any ideals what might be causing this ? Many thanks.

"Locating Exceed installation ...
gambit failed in locating Exceed installation on your system.
Please try to start Exceed manually before you run gambit.
Starting C:\Fluent.Inc\gambit2.3.16\ntx86\gambit.exe -device open -id default_id2012 -new ...
Gambit build SP2006032921.
Warning : The current transport does not permit the attempted TCPIP connection.
TRANS(SocketINETGetAddr): tnamebysocket() failed
TRANS(SocketINETConnect): TRANS(SocketINETGetAddr) () failed
TRANS(Open): transport open failed for tcp/Paul-Win7:0
Unable to open display"

Hello there,

I would like to recommend you to install both Gambit version 2.3.16 and 2.4.6

You also should have Exceed 2006 in order to run it.

- First install exceed (as administrator)and the license then restart your pc
- then install Gambit 2.3.16(as administrator) and set up your license
- install gambit 2.4.6 (as administrator) and try to run it.
- if it does not work, try to start exceed first manually and then run gambit 2.4.6
-close the running programs and try to launch gambit 2.3.16.

Now the program must be running. if not be sure that you copy the content of your license file into the "license.dat" file which was created from the license set up.

hope this helps you

cyrusIII · April 1, 2016, 11:38

Anybody can tell me what is Exceed11 used for? I am new in CFD. I know (correct me if I am wrong) Gambit is probably for geometry and Fluent for solving and meshing but what is Exceed for?

November 5, 2010, 17:34	Fluent 6.3 / Gambit 2.3.16 / Exceed 11 problem on Win7	#1
pdilly New Member Paul Join Date: Nov 2010 Posts: 6 Rep Power: 15	My Fluent installation runs fine on Win7 x64, but I get the following problem when i try to start Gambit, after first launching exceed. I've tried the usual things like disabling firewall --- any ideals what might be causing this ? Many thanks. "Locating Exceed installation ... gambit failed in locating Exceed installation on your system. Please try to start Exceed manually before you run gambit. Starting C:\Fluent.Inc\gambit2.3.16\ntx86\gambit.exe -device open -id default_id2012 -new ... Gambit build SP2006032921. Warning : The current transport does not permit the attempted TCPIP connection. TRANS(SocketINETGetAddr): tnamebysocket() failed TRANS(SocketINETConnect): TRANS(SocketINETGetAddr) () failed TRANS(Open): transport open failed for tcp/Paul-Win7:0 Unable to open display"

November 6, 2010, 10:08		#2
saha2122 Member Join Date: Apr 2010 Posts: 63 Rep Power: 16	hi pdilly ! i had this problem too!! finally i download XpMode from microsofts site ! then i run fluent in 7 !!!! but Gambit is on the XpMode !!! its realy intresting!!! try it !!!!!! u can install gambit on 7 32bit!!!! but i think its not possible to install it on the 64bit !!!!!! good luck SaHa Aki_toan likes this.

November 7, 2010, 10:08	Location	#3
vinerm Senior Member Vinerm Join Date: Jun 2009 Location: Nederland Posts: 2,946 Blog Entries: 1 Rep Power: 35	I am not really sure of Windows 7. However, it only means that Exceed is not installed at the location where Gambit expects it to be. So, just reinstall Exceed and make sure you do not alter it's location of installation. If it is installed at default location, then may be the version is not right for Windows 7. Fluent does not need X-server, therefore, runs properly.

December 13, 2010, 16:56	Eureka - Got it!	#18
Pat.Walsh New Member Pat Walsh Join Date: Nov 2010 Posts: 1 Rep Power: 0	Okay, here's how you run Gambit 2.3.16 on Windows 7 64 bit with Exceed 2006 (V11). I know, I didn't think it could be done either so no need for Windows XP emulators anymore. Surprisingly it's an extremely obvious and simple solution! 1) Go to Hummingbird Exceed in start menu and start Exceed manually. 2) Go to Fluent in Start menu and start Gambit 3) A gambit start menu will appear 4) The menu defaults to c:\windows\system.. but this is wrong 5) Browse to C:\Program Files (x86)\Hummingbird\Connectivity\11.00\Exceed 6) Click 'OK' and hey presto, Gambit starts perfectly! No reason why this wouldn't work for any other version of Exceed as well so long as you point the Gambit install to the correct Exceed folder. sajjadli likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem of running parallel Fluent on linux cluster	ivanbuz	FLUENT	15	September 23, 2017 19:12
Force Field - Vibrating Immerse Cantilever Problem - Fluent 6.3	herger	FLUENT	0	June 27, 2010 19:50
Problem about Fluent on Linux	hbinma	FLUENT	3	July 6, 2008 10:49
Gambit 6.3 problems with Exceed	Anonymous	FLUENT	1	June 15, 2006 02:23

November 7, 2010, 11:46		#4
pdilly New Member Paul Join Date: Nov 2010 Posts: 6 Rep Power: 15	Thanks for responses. I got the free VMWare player (what a great piece of software www.vmware.com), installed a winXP 32 virtual machine, then installed Gambit on on the virtual machine and it works fine (eventually). By sharing the directory location, the meshed gambit files in the XP virtual machine can be accessed from outside, by Fluent running in Win7 ... cool. pdilly

November 22, 2010, 08:18		#5
dresden New Member kartik Join Date: Nov 2010 Posts: 6 Rep Power: 15	i have installed vwmare player but how to install windows xp virtual machine,plz let me know..

November 22, 2010, 08:36		#7
pdilly New Member Paul Join Date: Nov 2010 Posts: 6 Rep Power: 15	Start VMWare Player, click "File / Create a New Virtual machine" Insert your Win XP installation CD, then select "Installer disc" and install from there. You'll probably have to activate the Win XP installation (i did mine by phone).

November 23, 2010, 07:10		#8
dresden New Member kartik Join Date: Nov 2010 Posts: 6 Rep Power: 15	i have installed xp and then exceed and gambit but it is still not working and showing the folloewing message: Gambit build SP2006032921. Cannot open connect stream. TRANS(SocketINETGetAddr): tnamebysocket() failed TRANS(SocketINETConnect): TRANS(SocketINETGetAddr) () failed TRANS(Open): transport open failed for tcp/kartik-0a5ee45d:0 Unable to open display

November 23, 2010, 08:01		#9
pdilly New Member Paul Join Date: Nov 2010 Posts: 6 Rep Power: 15	Check that your firewall is disabled.

November 23, 2010, 18:35		#10
FabioT New Member Join Date: Jun 2010 Posts: 27 Rep Power: 15	Hi! Sorry but I need some help ... I am going crazy with the installation and keeps on giving the same error... Even with the WindowsXP mode.. I have windows7 64bit.. Can somebody give me the exact steps to run it please?? It is really important for College and I need it tomorrow possibly.... Thank you very much! (if anybody has some files to send to me just send me a pvt msg and we can email each other!) Fabio

November 24, 2010, 04:25		#11
pdilly New Member Paul Join Date: Nov 2010 Posts: 6 Rep Power: 15	I've got Win7 64 also, Fluent works fine on it. For Gambit, I didn't use Win XP mode, but used VMWare player instead, installed a Win XP 32 virtual machine, and installed Hummingbird Exceed and Gambit on the virtual machine. As long as the firewall on the virtual machine is disabled, it works fine.

November 24, 2010, 04:33		#12
FabioT New Member Join Date: Jun 2010 Posts: 27 Rep Power: 15	hi, sorry what is the difference between xpmode and xp virtual machine? fluent works on my laptop with no problems, too. thanks,

November 24, 2010, 04:49		#13
pdilly New Member Paul Join Date: Nov 2010 Posts: 6 Rep Power: 15	I suggest you get a copy of "VMWare Player" ... see www.vmware.com/products/player/ It's free! When you've installed it, you can then install a Win XP system as a "virtual" PC within your Win7 64 machine. You'll need a Win XP installation CD to do so. When XP is installed, then install Exceed, Gambit, disable firewall ... and you should be good to go.

November 29, 2010, 13:04		#15
FabioT New Member Join Date: Jun 2010 Posts: 27 Rep Power: 15	Hi thanks but I solved it looking for another version. Bye

December 3, 2010, 03:47		#16
dresden New Member kartik Join Date: Nov 2010 Posts: 6 Rep Power: 15	I have done everything possible to run gambit on my laptop but in vain, as I am still not able to open it and the same msg appears that i have put in the last post.Plz help me.

April 1, 2016, 11:38		#20
cyrusIII Member Si Cy Join Date: Mar 2016 Posts: 31 Rep Power: 10	Anybody can tell me what is Exceed11 used for? I am new in CFD. I know (correct me if I am wrong) Gambit is probably for geometry and Fluent for solving and meshing but what is Exceed for?