flow in a vertical annulus
hi,, i am modelling a flow in vertical annulus with porous media, with centrally placed heater and flow inlet and outlet conditions. it is surrounded by insulation. boundary conditions given are velocity inlet , volumetric heat generation and out flow. i am getting a reversed flow and there is no temperature rise in the annulus.
help me..... |
hi.... i am also dealing with the same kind of problem. i have problem with out flow condition. i extended the domain and imposing new conditions....
|
i tried it n i didnt got the answer.....can any body help us
|
reversed flow
hi
Check your operationg conditions..(Gravity) and try changing BC for velocity use direction and magnitude option. good luck |
i gave velocity inlet and outflow condition, volumetric heat generation from heater and remaining side adiabatic.. i am using boussinesq approximation....
|
Change your outlet BC to outflow. and let us know about your results.
|
if i use air instead of water ..temperatures r rising upto 100 deg. for water its not lik that. volumetric heat generation is 300000 w/m^3.
also pls tell me how to model a porous medium.... |
All times are GMT -4. The time now is 19:11. |