|
[Sponsors] |
January 6, 2011, 21:35 |
Pressure Boundary Condition
|
#1 |
Senior Member
hamid
Join Date: Nov 2010
Posts: 185
Rep Power: 15 |
Hi
What is the definition of pressure inlet and pressure outlet in Fluent, I am going to simulate a cylinder with the same amount of pressure inlet and pressure outlet, as far as I understand because the pressure at both sides of the cylinder are identical there shouldn’t be any flow and the velocity should be zero, but there is a flow from inlet to outlet with non-zero speed, It happens even when the pressure outlet is higher than pressure inlet, Could anybody let me know why? Thanks very much in advance |
|
January 7, 2011, 04:06 |
|
#2 |
Senior Member
Bernhard
Join Date: Sep 2009
Location: Delft
Posts: 790
Rep Power: 21 |
Did you have a look at the Fluent Users Guide? Boundary conditions and the solved equations are described in some detail there.
|
|
January 7, 2011, 06:30 |
|
#3 |
Senior Member
hamid
Join Date: Nov 2010
Posts: 185
Rep Power: 15 |
Thanks for reply,
Yes, but still abit confused, in my feeling when the pressure inlet and outlet are the same then it means that there is not delta P and there wont be no motion, I Know this is wrong (in fluent)but I don’t know why? |
|
January 7, 2011, 09:19 |
|
#4 |
Senior Member
hamid
Join Date: Nov 2010
Posts: 185
Rep Power: 15 |
If anybody is aware of the answer please kindly share,
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wind turbine simulation | Saturn | CFX | 58 | July 3, 2020 02:13 |
Pressure boundary condition | C-H Kuo | Main CFD Forum | 18 | September 16, 2016 04:19 |
how can i give a boundary condition with pressure and velocity together | akhenathon | FLUENT | 6 | April 24, 2012 19:32 |
Pressure Boundary condition | abishek | FLUENT | 1 | July 28, 2008 09:14 |
Pressure boundary condition and real gas | Pifou | FLUENT | 0 | July 19, 2005 12:42 |