suitable meshing software for fluent

ahilana · January 7, 2011, 08:10

Hi everybody.

I am new to cfd.i got gambit for meshing i didn't hav exceed.Its said that no newer gambit is released for 64-bit.So ,Can any one suggest any other software or where to find exceed.
Thanks in advance..

Hadi.AsghariME@Gmail.com · March 18, 2013, 06:04

hi
in my opinion nastran is better than gambit
give it a try and tell me the result
as i told gambit has some problems specially in importing .dat files for airfoils

Email: Hadi.AsghariME@Gmail.com

diamondx · March 18, 2013, 09:51

Go with icem cfd. use what most people use so you can get support from this forum...

aat · March 18, 2013, 10:32

Hello,

If you are looking for software that uses Gambit's meshing approach, look at Trelis, from CSimsoft (www.csimsoft.com). It is 64 bit, and in terms of GUI layout, geometry and meshing, it is very much based on Gambit, and it does not require exceed. It also exports native FLUENT mesh files.

If you are not familiar with Gambit, and are just looking for any mesh generator, then ANSYS Meshing is included with a FLUENT license, so you don't need to spend additional $$.

I hope this helps,
-Amish

(Disclosure: I am a distributor of CSimsoft)

January 7, 2011, 08:10	suitable meshing software for fluent	#1
ahilana New Member ahilan A Join Date: Dec 2010 Location: nagercoil Posts: 3 Rep Power: 15	Hi everybody. I am new to cfd.i got gambit for meshing i didn't hav exceed.Its said that no newer gambit is released for 64-bit.So ,Can any one suggest any other software or where to find exceed. Thanks in advance..

March 18, 2013, 09:51		#3
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 28	Go with icem cfd. use what most people use so you can get support from this forum... Hadi.AsghariME@Gmail.com likes this. __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

March 18, 2013, 10:32		#4
aat New Member Join Date: Oct 2009 Posts: 15 Rep Power: 16	Hello, If you are looking for software that uses Gambit's meshing approach, look at Trelis, from CSimsoft (www.csimsoft.com). It is 64 bit, and in terms of GUI layout, geometry and meshing, it is very much based on Gambit, and it does not require exceed. It also exports native FLUENT mesh files. If you are not familiar with Gambit, and are just looking for any mesh generator, then ANSYS Meshing is included with a FLUENT license, so you don't need to spend additional $$. I hope this helps, -Amish (Disclosure: I am a distributor of CSimsoft) Hadi.AsghariME@Gmail.com likes this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[CAD formats] Hexahedral meshing of CAD files - Which free software?	Wolle	OpenFOAM Meshing & Mesh Conversion	14	November 22, 2014 21:40
Prefix to Show Which Meshing Software	jola	ANSYS Meshing & Geometry	5	October 27, 2011 05:26
Meshing software	pradeap	Main CFD Forum	4	November 4, 2010 11:06
Meshing software	pradeap	Main CFD Forum	1	June 17, 2010 08:46
Is there a meshing tool within the Ansys Fluent software	srikanth	ANSYS	5	March 21, 2010 14:04

March 18, 2013, 06:04		#2
Hadi.AsghariME@Gmail.com New Member Hadi Asghari Join Date: Mar 2013 Posts: 1 Rep Power: 0	hi in my opinion nastran is better than gambit give it a try and tell me the result as i told gambit has some problems specially in importing .dat files for airfoils Email: Hadi.AsghariME@Gmail.com