CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Flow bench simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 20, 2011, 14:59
Default Flow bench simulation
New Member
Join Date: Jan 2011
Posts: 1
Rep Power: 0
SkullLTU is on a distinguished road

I am new in this forum and seeking help with my assignment. I have done flow bench testing of a cylinder head. I have some experience with CFX and FLUENT also i have a design of my intake port. Problem is that whenever i flow my cylinder head in FLUENT i never get same mass flow rate results as with the real test. I am applying 0 pressure on input boundary, 6220 on output and they all operate at 1atm pressure. I tried it with laminar and k-epsilon models but always get the same flow value of ~0.5 kg/s. The actual intake port value is ~ 45.59 L/s. Could any one help me and tell me what am I doing wrong?

Thank you
SkullLTU is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Domain format problem on airfoil flow simulation andrenonaka CFX 6 December 4, 2014 04:57
Channel flow setup in Large-eddy simulation Weihua Main CFD Forum 5 January 24, 2012 06:16
Multiphase flow - simulation crashing yschati CFX 14 November 16, 2010 18:29
Natural convection - Inlet boundary condition max91 CFX 1 July 29, 2008 20:28
About unsteady flow simulation Ji NUMECA 3 June 10, 2003 10:04

All times are GMT -4. The time now is 00:36.