 |
 |
 |
|
|
|
[Sponsors] | ||||
January 28, 2011, 07:45
|
Solver For low subsonic speed simulation
|
#1 |
|
New Member
Firdaus
Join Date: Nov 2010
Posts: 4
Rep Power: 15  |
Hai,.
Anyone can help me to solve problem regarding my UAV simulation.I got confusion about the value of drag coefficient (CD) since the result obtain from Fluent shows very high value (about 0.026 at 0 angle of attack,Result from wind tunnel and Star CD are 0.018 and 0.016 respectively ) but the value for CL almost the same like wind tunnel and StarCD .For your information, the design speed for my UAV is at 35m/s or 0.1 Mach number and consider as low subsonic speed. The solver that i used in this simulation is Coupled Explicit with Spalart Almaras. Anyone can help me please. |
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| solver for subsonic compressible turbulent flow in OF 1.7 | nileshjrane | OpenFOAM Running, Solving & CFD | 20 | February 13, 2012 05:54 |
| help with compressible flow BC's (need subsonic flow) | meangreen | Main CFD Forum | 5 | July 24, 2010 13:16 |
| What solver to use for inviscid flow simulation over missile | mecbe2002 | OpenFOAM | 0 | April 27, 2010 11:10 |
| Poor Convergence for Transient Subsonic Diffuser sims with flow separation | TWaung | CFX | 1 | April 16, 2009 08:25 |
| flow simulation across a small fan | jane luo | Main CFD Forum | 15 | April 12, 2004 17:49 |
Linear Mode
