CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Error message in FLUENT

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 21, 2011, 08:52
Default Error message in FLUENT
  #1
New Member
 
Kenneth
Join Date: Feb 2011
Posts: 5
Rep Power: 6
aftershox is on a distinguished road
Hi,

I'm fairly new to ANSYS so bear with me. I've been trying to model a helicopter blade rotating near a wall. So what I've done is basically, developed a blade and contained it inside an cylindrical enclosure. After that I've made another box enclosure to simulate the walls outside. I've created named selections for the relevant sections. I didnt suppress the blade body though. So after all this when using FLUENT to get a solution, I've come across the error that states ' model information file is not compatible with mesh' .

Any idea on what i've been doing wrong?

Would greatly appreciate any tips.

Thanks
aftershox is offline   Reply With Quote

Old   August 23, 2013, 05:16
Default model information file is not compatible with mesh
  #2
New Member
 
Tamara Annabelle
Join Date: Jul 2013
Posts: 26
Rep Power: 3
Marabelle is on a distinguished road
Hi!
I have the same or at least a similar problem. I created named selections in the DM which I need for meshing. I don't need all of them for the solution though and thus activated "No" in the box "send to solver" for the named selctions not needed. But then I get the same error message "model information file is not compatible with mesh" and beeing asked if I 'would like to match these zones to make model compatible with mesh'
Did you find any solution for your problem? Or does any one else know how to solv it?
Thanks,
Mara
Marabelle is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stopping a Fluent batch job AND saving the data! Possible? Volker Pawlik FLUENT 7 May 22, 2014 22:30
A Problem of Fluent Interpreted UDF: parse error knight Fluent UDF and Scheme Programming 11 December 8, 2013 10:00
Two questions on Fluent UDF Steven Fluent UDF and Scheme Programming 4 September 20, 2013 16:30
Compared MRFSimpleFoam and Fluent in a centrifugal pump! renyun0511 OpenFOAM Running, Solving & CFD 8 July 6, 2010 06:24
Problems in lauching FLUENT Lourival FLUENT 3 January 16, 2008 17:48


All times are GMT -4. The time now is 14:09.