CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Flow over a rectangular cylinder CD too low

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 2, 2011, 14:55
Default Flow over a rectangular cylinder CD too low
  #1
New Member
 
Lee
Join Date: Oct 2010
Posts: 1
Rep Power: 0
lee557 is on a distinguished road
Hi,
I have been trying to simulate the flow over a rectangular cylinder but I still couldn't get the CD close to the results published on paper. I used k-epsilon method to obtain a steady state results before using LES to find the unsteady state.

Boundary Condition :-
Inlet Velocity : 0.32 m/s
Turbulent Intensity : 4.58%
Turbulent Length : 0.07 m

Reynolds Number is 22000

My drag Coefficient is approximately 1.4~1.6 and the CD published on paper was 2.0~2.2.

I attached my fluent mesh file which I uploaded on Megaupload and hope that someone can identifies my mistakes. Thanks in advance

http://www.megaupload.com/?d=8UFLGI3U

Thank you.
lee557 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2D Flow over cylinder, low lift/drag coefficients olives03 FLUENT 1 February 11, 2011 19:05
Flow past cylinder (Re=10^5) lbeaudet Main CFD Forum 9 June 2, 2009 03:59
flow over a cylinder urgent! kevin FLUENT 7 June 8, 2006 01:19
Flow over a cylinder Anna Main CFD Forum 9 March 24, 2006 15:32
fluid flow fundas ram Main CFD Forum 5 June 17, 2000 21:31


All times are GMT -4. The time now is 17:59.