|
[Sponsors] |
March 7, 2011, 19:50 |
question about a droplet set
|
#1 |
New Member
zhangkaiyu
Join Date: Mar 2011
Posts: 1
Rep Power: 0 |
dear everyone
I set 2d VOF model case, using patching function put a half circle shape droplet on the floor , hoping get a stactic droplet shape under the condition of the contact angle with 120 degree In my case, I did not set any force any more, except the gravity. and the droplet material is water, the enviroment is air, and the surface tension is 0.072, same as the example of the manual. But the result of my case is quite weird, the bubble shape is keep change in a unreasonable way. can anyone offer some advice? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What value shall I set for the Convergence criteria? | steventay | CFX | 7 | May 14, 2010 12:44 |
OpenFOAM on MinGW crosscompiler hosted on Linux | allenzhao | OpenFOAM Installation | 127 | January 30, 2009 19:08 |
Problems with installation of OpenFoam | sheyer | OpenFOAM Installation | 8 | July 28, 2008 03:45 |
Compiling OpenFOAM13 on AMD64 with Redhat Enterprise | mbeaudoin | OpenFOAM Installation | 20 | June 17, 2008 06:43 |
Problem in installation of OpenFOAM | sachin | OpenFOAM Installation | 7 | January 22, 2008 01:40 |