|March 21, 2011, 10:44||
Standard procedure to check grid quality in Gridgen software
Join Date: Jun 2010
Posts: 12Rep Power: 7
How I can check grid quality in Gridgen software?
In some cases, when I import grid in Fluent I get the following warning:
The mesh contains very high aspect ratio hexahedral or polyhedral cells. The default algorithm used to compute the wall distance required by the turbulence models might produce wrong results in these cells. Please inspect the wall distance by displaying the contours of the 'Cell Wall Distance' at the boundaries. If you observe any irregularities we recommend the use of an alternative algorithm to correct the wall distance. Please select /solve/initialize/repair-wall-distance using the text user interface to switch to the alternative algorithm.
In some cases I get above warning and in some case there is no warning.
How I can make sure in Gridgen software that grid quality is good enough so that there would not be any warning in Fluent?
|March 21, 2011, 14:56||
Examine Boundary Spacing in Gridgen
Join Date: Mar 2009
Location: Fort Worth, Texas, USA
Posts: 64Rep Power: 8
Gridgen has a variety of quality measures available, including Fluent's equivolume and equiangle skewness.
In this case, since you want to check the spacing at the boundaries, go to the ASW menu and choose Examine. Select the boundaries for which you want to measure the spacing, then Done. Select Bndry Spacing for the Examine Function, and you will see countours of boundary spacing.
Hope this helps,
|Thread||Thread Starter||Forum||Replies||Last Post|
|OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found||piprus||OpenFOAM Installation||22||February 25, 2010 14:43|
|Grid check fails after sliding mesh calculation||Tito||FLUENT||0||March 3, 2008 15:28|
|recommend grid generation software for fortran||zonexo||Main CFD Forum||0||May 16, 2006 22:42|
|[Popular GRID software ?]||Beginner||Main CFD Forum||1||August 8, 2002 08:07|
|Grid generation software||Roued||Main CFD Forum||1||November 22, 2001 06:26|