 |
 |
 |
|
|
|
[Sponsors] | ||||
March 23, 2011, 03:48
|
boundary conditions
|
#1 |
|
New Member
abdul azis
Join Date: Feb 2011
Location: semarang, indonesia
Posts: 9
Rep Power: 15  |
velocity inlet turbulence, specification method for sedan geometry on wind tunel,,turbulenct intensiity value and turbulent length scale for value at velocity inlet?how much i predict this value??
and the outlet??? please help... 
|
|
|
|
|
|
March 23, 2011, 07:04
|
|
#2 |
|
Member
Robert
Join Date: Mar 2011
Location: Warsaw
Posts: 62
Rep Power: 15 |
Prowide us with some more detailed data. What type of wind tunel is this? What is air speed. Turbulence modeling is always very baffling.
|
|
|
|
|
|
|
March 24, 2011, 02:44
|
detail data
|
#3 |
|
New Member
abdul azis
Join Date: Feb 2011
Location: semarang, indonesia
Posts: 9
Rep Power: 15 |
i use the bmw 320i sedan for my basic geometry,the valid Cd is 0,26, i want use viscous model k-omega SST,,velocity magnitud 25-30 m/s.. area = 2.08 m2, length wind tunel = 23.32 m, turbulence specification method = intensity and length scale,,but i don't know the value T I and Length scale must i predict..to get Cd 0,26,, and than i redesign the sedan geometry for get optimal value Cd,,this for my thesis,,please help...
|
|
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Impinging Jet Boundary Conditions | Anindya | Main CFD Forum | 25 | February 27, 2016 12:58 |
| symmetry boundary conditions in cfx | lost.identity | CFX | 41 | May 22, 2013 07:21 |
| [Netgen] boundary conditions and mesh exporting | vaina74 | OpenFOAM Meshing & Mesh Conversion | 2 | May 27, 2010 09:38 |
| Pressure boundary conditions | Lionel S. | Main CFD Forum | 1 | August 24, 2007 18:03 |
| [Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |
Linear Mode
