CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   2 gases mixing flow (https://www.cfd-online.com/Forums/fluent/87276-2-gases-mixing-flow.html)

pipin April 15, 2011 12:14

2 gases mixing flow
 
Hi,

I would like to know your opinion on a Fluent study in progress...

I've to model a flow in a tube with his plume in ambient air. The inlet is composed by "gaz 1" (at 2000 K).
Afer few seconds, inlet pressure = 0 Pa. And then i've to study temperature versus time of the tube walls.

My first idea is to put the model in laminar because the velocity of the 2 fluids is very very low, so i think natural convection is predominant but my model is in 2d-axi, i can't add gravity (gravity axe is perpendicular to the axe of tube...). Moreover, if i use k-e standard model, the ambient air does not penetrate in the tube...

Thank you in advance for your advice,


All times are GMT -4. The time now is 20:12.