- **FLUENT**
(*http://www.cfd-online.com/Forums/fluent/*)

- - **Dynamic mesh is not getting updated.**
(*http://www.cfd-online.com/Forums/fluent/87295-dynamic-mesh-not-getting-updated.html*)

Dynamic mesh is not getting updated.I'm trying to stimulate flow in the Left ventricular region of the heart during diastole for which I have written the following UDF :
#include <stdio.h> #include "udf.h" #include "dynamesh_tools.h" #define pi 3.141592654 static real r_lv=0.023, flowrate_off=0.8; static real force, dv ,flowrate ,t_use; DEFINE_CG_MOTION(Velociraptor,dt,vel,omega,time,dt ime) { Thread *t=DT_THREAD ((Dynamic_Thread *)dt); face_t f; real *AA; /*reset velocities*/ NV_S(vel, =, 0.0); NV_S(omega, =, 0.0); if (!Data_Valid_P()) return; /*t=DT_THREAD (dt);*/ force = 0.0; begin_f_loop (f, t) {AA = F_AREA_CACHE (f, t); force += F_P (f,t) * AA[0];} end_f_loop(f,t); t_use = 0.639638*CURRENT_TIME/0.6 - 0.039638; /* revise later */ flowrate = -99.865 *pow(t_use, 4); flowrate = flowrate + 119.124 *pow(t_use, 3); flowrate = flowrate - 43.389 *pow(t_use, 2); flowrate = flowrate + 4.3084 *t_use; flowrate = flowrate + 0.1951; flowrate =(flowrate + 0.052) * 0.3/0.3748; flowrate = - flowrate /1000.0 * flowrate_off; /* /1000.: unit factor */ vel[1] = flowrate / pi*r_lv*r_lv ; } The problem I'm facing is that the geometry is not getting updated.It updates for the first time step,but then that remains constant: Updating mesh to time 1.00000e-03 (step = 00001)... Dynamic Mesh Statistics: Minimum Volume =2.91284e-011 Maximum Volume =2.54127e-009 Maximum Cell Skew =8.51365e-001 (cell zone 4) Maximum Face Skew =4.59499e-001 (face zone 19) done. Updating mesh to time 2.00000e-03 (step = 00002)... Dynamic Mesh Statistics: Minimum Volume =2.91284e-011 Maximum Volume =7.82814e-009 Maximum Cell Skew =8.51365e-001 (cell zone 4) Maximum Face Skew =4.59499e-001 (face zone 19) done. Updating mesh to time 3.00000e-03 (step = 00003)... Dynamic Mesh Statistics: Minimum Volume =2.91284e-011 Maximum Volume =7.82815e-009 Maximum Cell Skew =8.51365e-001 (cell zone 4) Maximum Face Skew =4.59499e-001 (face zone 19) done. Can someone tell me what the problem might be ? |

same problemHi, i'm having the same problem
Do you resolve this? thanks |

All times are GMT -4. The time now is 09:37. |