CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

creat a monitor domain in 3D model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 1, 2011, 09:48
Default creat a monitor domain in 3D model
  #1
New Member
 
cz
Join Date: Apr 2010
Posts: 3
Rep Power: 7
zhiyii is on a distinguished road
hello,
i have a problem.i need to monitor the date(like mass flow rate) in the cross section of the middle inlet(there are 3 inlet), like the pic of the simple cause of my model in FLUENT(note:not in the inlet boundary).
my model is 3D.how can i create a domain in the monitor location.i use the plane surface tool to create plane pass this location,but the plane pass also pass through the other two inlet.


if you cannot see pic ,click here please:
http://www.flickr.com/photos/6239250...in/photostream
zhiyii is offline   Reply With Quote

Old   May 2, 2011, 02:30
Default
  #2
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 2,973
Rep Power: 30
-mAx- will become famous soon enough
try to combine the plane surface tool with clip tool
You can narrow your surface between 2 iso values (x-y or z-coordinate, or whatever)
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Old   May 2, 2011, 06:29
Default
  #3
New Member
 
cz
Join Date: Apr 2010
Posts: 3
Rep Power: 7
zhiyii is on a distinguished road
thank you

i have done fellow your advise and get it!

Quote:
Originally Posted by -mAx- View Post
try to combine the plane surface tool with clip tool
You can narrow your surface between 2 iso values (x-y or z-coordinate, or whatever)
zhiyii is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem on EDC model for coal combustion lei FLUENT 3 April 29, 2014 08:55
question about turbulence model selection and sensitivity karananand Main CFD Forum 1 February 26, 2010 05:41
Centrifugal Pump and Turbulence Model Michiel CFX 12 January 25, 2010 04:20
Problems bout CFD model of biomass gasification, Downdraft gasifier wanglong FLUENT 2 November 26, 2009 00:27
Grid resolution for full-scale and down scaled model gravis Main CFD Forum 0 October 2, 2009 10:27


All times are GMT -4. The time now is 16:24.