CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Fluidized bed Modeling (http://www.cfd-online.com/Forums/fluent/88338-fluidized-bed-modeling.html)

Shahed_iasir May 14, 2011 10:28

Fluidized bed Modeling
 
We are modeling a fluidized bed(with or without reaction) in Gambit-Fluent.But we are having some problem in the beginning like
1)how can we define complete bed of solids in gambit or fluent.

We are not using any UDFs(at the beginning) but we will try next.So any one please help.....it would be very great if you suggest some tutorial or link or papers....

alighaffari May 19, 2011 03:58

I think its will be usefull if see the chapters19 and 21 in fluent6.3 tutorials .

sangramroy May 20, 2011 00:26

Go through chapter 22 of fluent 6.3 tutorial. It specifically discusses a problem on fluidization.

ramakant November 28, 2012 08:52

UDF Should be different for different fluidization condition
 
1 Attachment(s)
Quote:

Originally Posted by sangramroy (Post 308492)
Go through chapter 22 of fluent 6.3 tutorial. It specifically discusses a problem on fluidization.

i am doing modeling of fluidization bed combustion in 2D
should i create UDF for my research
i have created my geometry part in GAMBIT now to introduce phase in fluent link coal after getting flame temperature with the help of gas (800)

in meddle part how to show coal particle for complete combustion

plz help me...

thanks
best regards
ramakant
ramakantgadhewal@gmail.com


All times are GMT -4. The time now is 12:53.