CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Boundary condition using .prof file (http://www.cfd-online.com/Forums/fluent/88709-boundary-condition-using-prof-file.html)

sidzishere May 24, 2011 08:04

Boundary condition using .prof file
 
Could someone guide me as to how the boundary condition for the a non uniform pressure profile can be set using the profile option. I need guidance as to how to write the .prof file.... Is it possible to create profiles in CFX and import them and read them in fluent as a boundary profile.

madhuvc May 24, 2011 15:31

I am not sure about importing the profile file from CFX, but I believe if you can change the CFX file to a *.prof file, without messing up with the fluent profile file structure, I guess this should be possible.

Generating a profile file within fluent.. Select Boundary Condition --> Profiles -->Write--> Define new --> Select zone on the left and parameter on the right.
write this as a *.prof file. Open the file with a text editor and you should be able to add values to your profile.

If you need more information, please refer

Reading and Writing Profile Files in User Guide Section 4.6


All times are GMT -4. The time now is 07:11.