|
[Sponsors] |
June 16, 2011, 01:29 |
Mesh Independent Problem
|
#1 |
New Member
ZenCef
Join Date: Feb 2010
Posts: 23
Rep Power: 16 |
Hi Guys,
I've a convection problem between wall and tube. There are three solids contacting eacg other. I've adapted contacting surfaces. There are concection boundry condition on both side of wall and inside of tube. For the same B.C. the reference temperature on the pipe and heat flux through the interface are rising with element number. I think element number should be sufficient. I attached model and the results according to node number, what could be my mistake ? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dynamic Mesh Problem. | Tom Clark | FLUENT | 10 | June 21, 2021 04:27 |
3D Hybrid Mesh Errors | DarrenC | ANSYS Meshing & Geometry | 11 | August 5, 2013 06:42 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
Moving mesh problem | Geon-Hong | FLUENT | 3 | April 5, 2010 03:24 |
mesh generation problem | Ellen | FLUENT | 7 | February 18, 2009 21:20 |