CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Re: Thermal Energy Storage modelling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 25, 2013, 08:02
Default Re: Thermal Energy Storage modelling
  #1
Member
 
Yash Ganatra
Join Date: Mar 2013
Posts: 67
Rep Power: 13
yashganatra is on a distinguished road
Hi,
I am working on Thermal Energy storage. In the attached figure, inside an enclosure, water (at 310 K) flows in U-tube, the enclosure contains gallium (MP=302.9 K). Thus melting should occur.
1. I want to know how should i go about in setting up the problem. Should i go for heat exchanger model?

2. Which boundary conditions should i give to the exchanger walls? Heat transfer should occur on the walls leading to melting.

Any suggestions are most welcome.
I have attached the geometry.
The walls of the enclosure are adiabatic
Thanks,
Yash
Attached Images
File Type: jpg Thermal Energy Storage.JPG (38.3 KB, 19 views)
yashganatra is offline   Reply With Quote

Reply

Tags
fluent 13, heat exchanger, heat transfer, melting, setup

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
error message cuteapathy CFX 14 March 20, 2012 07:45
thermal energy storage simulation Hear2020 FLUENT 0 March 6, 2011 17:21
Constant velocity of the material Sas CFX 15 July 13, 2010 09:56
ATTENTION! Reliability problems in CFX 5.7 Joseph CFX 14 April 20, 2010 16:45


All times are GMT -4. The time now is 11:18.