CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Help meshing in Gambit (https://www.cfd-online.com/Forums/fluent/90164-help-meshing-gambit.html)

SleeperService July 2, 2011 18:11

Help meshing in Gambit
 
1 Attachment(s)
Hi all, I'm trying to quad-map mesh a rectangular face with a quarter-circle cut-out in gambit, but am frustrated as it keeps telling me the number of intervals is wrong. I'm hoping someone can help me out, since I'm a little lost. I'm also not exactly sure whether my face vertex definitions are correct - I'm hoping someone can help me out here. I'm sorry if this is a stupid question, I'm still quite new to GAMBIT and CFD in general :p

Far July 3, 2011 14:20

put the 8 intervals on the circular region (90 deg sector)

-mAx- July 4, 2011 02:41

delete all the edge-mesh except for the 2 edges forming the radius.
Then mesh the quarter-disk (as surface). Gambit will project automatically the right number of nodes on the arc.
Then mesh the other surface (no need to premesh all the edges first).

SleeperService July 10, 2011 00:18

Got it. Thanks guys!


All times are GMT -4. The time now is 17:46.