CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Fluent Convergence Problem (http://www.cfd-online.com/Forums/fluent/90511-fluent-convergence-problem.html)

nick978 July 12, 2011 15:27

Fluent Convergence Problem
 
Hello,
I have a system where I inject particles for around 15 seconds and let them settle over time. When I run the program it says that it converges after only 13 seconds even though there is still an incoming velocity as well as more particles. Does anyone know how I can fix this problem and get real answers.

Thank you,
Nick

1099230 July 13, 2011 16:14

Maybe your convergence criteria is too low. Go to the tab "Monitors" and check the option Residuals, you may want to make the convergence value lower.

Good luck!


All times are GMT -4. The time now is 00:11.