CFD Online Discussion Forums

CFD Online Discussion Forums (
-   FLUENT (
-   -   Modelling of a Mixing Tank in Workbench ANSYS 12.1 (

shadyenany August 16, 2011 13:30

Modelling of a Mixing Tank in Workbench ANSYS 12.1
Could any one help me to find a tutorial on how to model A mixing Tank in Workbench Ansys 12.1 (Fluent).??!!

Many Thanks

_Denis_ August 16, 2011 15:59

Is this what you've been searching for?

shadyenany September 13, 2011 11:16


Originally Posted by _Denis_ (Post 320364)
Is this what you've been searching for?

many thanks denis for that, but have you got the same tutorial for gambit 3.2.16?!

damivez91 January 14, 2014 21:05

can i get this tutorial too..
i cant open link that u give

jamalf64 January 15, 2014 17:29

do you mean stirred tank?

damivez91 February 18, 2014 14:57

can u email it to me

solmaz aryafar February 20, 2014 08:34


I was searching for a tutorial on simulation of mixing tank with Fluent, and I found this post; I also cannot open the link! _Denis_ would you please mail it to me too?
my email address is:
I would be very grateful for that.

aravindh February 20, 2014 13:02

mesh files
i need mesh files to work in fluent 14.5

can anyone send me the link to download mesh files plssssss

thanks in advance

regards: s.aravindh

ashar_md2001 November 7, 2014 11:16

need tank mesh file and tutorial
Hi Guys,
I am looking for mixing tank mesh files to work in fluent 15.0 and also tutorial

can you pls send me the link or file to download mesh file

thanks in advance


surojittaurus January 30, 2015 01:42

Mixing Tank Files
Does anybody have the files, the website is not responding. If somebody has it, could you please send it to


leovante March 11, 2015 11:31

Please send me too

Natali March 24, 2015 03:05

1 Attachment(s)
Hi all. Please help me.
I need to get velocity field around mixer in a mixing tank. The goal is to determine dead zones. So, I import geometry of mixer with outside cylinder in DM. Than I use "enclosure" tool to create tank zone. After substracting ("cylinder" minus "mixer geometry") I get two parts. One part is a rotating cylinder with emptiness inside in the form of mixer. And the second part is square tank, that surrounds rotating frame.

I have some doubts about my geometry model. I read some article, that says about simulating blades like zero thickness wall. But as I understand it is impossible to enclosure zero thickness surface. How to simulate rotating frame in my case? Thank you in advance for any answer.

All times are GMT -4. The time now is 09:48.