CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Problem with simulation bacic turbo model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 17, 2011, 03:38
Smile Problem with simulation bacic turbo model
  #1
Senior Member
 
teguhtf's Avatar
 
teguh hady
Join Date: Aug 2009
Location: Surabaya, Indonesia
Posts: 153
Rep Power: 7
teguhtf is on a distinguished road
Dear all,
I want to practice Chapter 8. BASIC TURBO MODEL WITH UNSTRUCTURED MESH. I find it on the GAMBIT 2.1 Documentation. I make geometry and mesh on GAMBIT 2.2.30 then I run it on FLUENT 6.2.16. There is no problem with Geometry and mesh. But, the problem appears when I export to FLUENT. Warnings appear on the screen just like this:
################################################
Warning: the rp-lsf option is not available in this solver

Warning: the sg-melt option is not available in this solver

Warning: the rp-host option is not available in this solver
#################################################

How to disappear that??
Thanks for your help
Teguh
__________________
Now Or Never!!!
teguhtf is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Turbulence model for mixing problem nileshjrane OpenFOAM Running, Solving & CFD 1 September 7, 2010 17:48
Problem in Buoyancy Model? dhrubo CFX 3 June 5, 2010 05:32
Problem in Herschel-Bulkely model emad FLUENT 0 May 20, 2009 14:20
Radiation problem for car model aero FLUENT 1 February 4, 2007 00:30
multiphase mixing Problem with MRF model in MixSim Srinivas FLUENT 0 October 17, 2005 06:35


All times are GMT -4. The time now is 20:22.