CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Speice Transport model (http://www.cfd-online.com/Forums/fluent/91750-speice-transport-model.html)

mazhar1613 August 22, 2011 00:33

Speice Transport model
 
1 Attachment(s)
my case: A battery room with batteries producing hydrogen. there is an air inlet duct and there is a mixture out let duct. As shown in figure attached. I have to findout the hydrogen concentration inside the room. I m using Species transport model without reaction.
i have problem with B.C. When i take "mass flow inlet" BC with "out flow" BC., ANSYS-FLUENT give me error
Primitive error: Gauss Elimination error: Singular Matrix

Anybody can guid me to right path...about model and BC

saymardin June 12, 2012 11:52

i have same problem.
 
Quote:

Originally Posted by mazhar1613 (Post 320951)
my case: A battery room with batteries producing hydrogen. there is an air inlet duct and there is a mixture out let duct. As shown in figure attached. I have to findout the hydrogen concentration inside the room. I m using Species transport model without reaction.
i have problem with B.C. When i take "mass flow inlet" BC with "out flow" BC., ANSYS-FLUENT give me error
Primitive error: Gauss Elimination error: Singular Matrix

Anybody can guid me to right path...about model and BC

i have same problem. if you seloution your peroblem please help mi.


All times are GMT -4. The time now is 18:17.