particle types in defining injection (DPM)

Achem · August 24, 2011, 03:42

Hello,

I have problem defining Injection. the particle types are inactive except "inert", and material I want to inject is not among the materials that I can choose.

where do you think the problem would be?

Thanks

Amir · August 24, 2011, 06:36

Hi,
you can change particle material in (define->material->inert particle) as well.

Achem · August 24, 2011, 07:45

Thanks, but I don't know why it doesn't accept anything but gas-oil in the define->material->inert particle. Did I sth wrong that everything is inactive?

By the way, I have water and gasoil mixing together in a pipeline, but as water content is too low, I chose DPM to solve it.

Thank you for answering.

Amir · August 24, 2011, 09:43

When you have set the particle material in injection, you cannot see other alternatives later, so you can achieve your desired type by changing particle material properties in this panel and saving that (change/create); So, change properties of (gas-oil) to what you want!

August 24, 2011, 03:42	particle types in defining injection (DPM)	#1
Achem New Member Atoosa Moshashaee Join Date: Mar 2011 Posts: 2 Rep Power: 0	Hello, I have problem defining Injection. the particle types are inactive except "inert", and material I want to inject is not among the materials that I can choose. where do you think the problem would be? Thanks

August 24, 2011, 06:36		#2
Amir Senior Member Amir Join Date: May 2009 Location: Montreal, QC Posts: 735 Blog Entries: 1 Rep Power: 22	Hi, you can change particle material in (define->material->inert particle) as well. __________________ Amir

August 24, 2011, 09:43		#4
Amir Senior Member Amir Join Date: May 2009 Location: Montreal, QC Posts: 735 Blog Entries: 1 Rep Power: 22	When you have set the particle material in injection, you cannot see other alternatives later, so you can achieve your desired type by changing particle material properties in this panel and saving that (change/create); So, change properties of (gas-oil) to what you want! __________________ Amir

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DPM Particle types, Spray Dryer	Mohsin	FLUENT	1	August 2, 2011 21:26
DPM UDF particle position using the macro P_POS(p)[i]	dm2747	FLUENT	0	April 17, 2009 01:29
multicomponent particle injection in DPM	Ning	FLUENT	0	December 23, 2008 08:23
UDF for particle injection in DPM model	sohail	FLUENT	0	July 22, 2008 10:12
Particle injection in DPM	Zenith	FLUENT	1	March 17, 2007 04:33

August 24, 2011, 07:45		#3
Achem New Member Atoosa Moshashaee Join Date: Mar 2011 Posts: 2 Rep Power: 0	Thanks, but I don't know why it doesn't accept anything but gas-oil in the define->material->inert particle. Did I sth wrong that everything is inactive? By the way, I have water and gasoil mixing together in a pipeline, but as water content is too low, I chose DPM to solve it. Thank you for answering.