WARNING: Periodic face x in zone y is not pointing to the right shadow.

CFDbeginner · July 18, 2011, 16:25

WARNING: Periodic face x in zone y is not pointing to the right shadow. Does anyone know what this means and how would I go about fixing it?

Thanks

gotang · September 30, 2011, 09:42

It means that the periodic specification in your mesh isn't right. In FLUENT, go to >Define>Boundary Conditions, select your periodic zone and hit "Edit". Check that the periodicity type is correctly selected as translational or rotational to match your geometry. This isn't the only thing that can cause this error in mesh check, but it's probably the most common one.

July 18, 2011, 16:25	WARNING: Periodic face x in zone y is not pointing to the right shadow.	#1
CFDbeginner New Member Join Date: Oct 2010 Posts: 7 Rep Power: 15	WARNING: Periodic face x in zone y is not pointing to the right shadow. Does anyone know what this means and how would I go about fixing it? Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 14:11
Version 15 on Mac OS X	gschaider	OpenFOAM Installation	113	December 2, 2009 10:23
[blockMesh] BlockMeshmergePatchPairs	hjasak	OpenFOAM Meshing & Mesh Conversion	11	August 15, 2008 07:36
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 14:00

September 30, 2011, 09:42		#2
gotang New Member Brian Join Date: Mar 2009 Posts: 17 Rep Power: 17	It means that the periodic specification in your mesh isn't right. In FLUENT, go to >Define>Boundary Conditions, select your periodic zone and hit "Edit". Check that the periodicity type is correctly selected as translational or rotational to match your geometry. This isn't the only thing that can cause this error in mesh check, but it's probably the most common one.